ScholaFly

PH08-05 Physics Watch

Specific heat capacity

Watch on YouTube

In this lesson

Specific heat capacity for GCSE Physics, with worked examples and the mistakes examiners report. AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Particles and matter 5 of 10. More at https://scholafly.com

By the end: Calculate the energy needed to change the temperature of a mass of material using change in thermal energy = mass x specific heat capacity x temperature change.

What it covers

  1. 0:00 Intro: specific heat capacity
  2. 0:48 Specific heat capacity
  3. 2:25 Specific heat capacity: the equation
  4. 4:41 The two pans in numbers
  5. 6:04 Grams and a temperature change
  6. 8:03 Your turn: finding
  7. 9:14 Reading from a graph
  8. 10:16 Specific heat capacity: the kettle
  9. 13:18 Two pans, one flame

Key words

About this video

Specific heat capacity | GCSE Physics | PH08-05

Specific heat capacity for GCSE Physics, with worked examples and the mistakes examiners report.
AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Particles and matter 5 of 10.
More at https://scholafly.com

Watch first: PH08-04 - https://youtu.be/A7O8KZbJGfw
Video code: PH08-05 (search "ScholaFly PH08-05")

#GCSEPhysics #ParticlesAndMatter #SpecificHeatCapacity

For teachers
This GCSE Physics lesson teaches specific heat capacity. By the end, students should be able to calculate the energy needed to change the temperature of a mass of material using change in thermal energy = mass x specific heat capacity x temperature change. It works through four worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.

Exam board specification references:
AQA 8463
- 4.1.1.3
- 4.3.2.2
Edexcel 1PH0
- 14.6
- 14.7
- 14.8
OCR J249
- P1.2d
- P1.2e
- PM1.2i

Read the transcript

Picture two identical burners, both on full, for the same two minutes. Will one kilogram of iron and one kilogram of water warm up by the same amount? On one burner sits an empty one kilogram iron skillet, and on the other a pan holding one kilogram of water. The skillet is soon hot enough to make a drop of water hiss and spit, and the water has barely got warm. Same mass, same flame, same time. It is tempting to say that iron is a better conductor. Conducting is a different property, and it does not explain this. Both pans get their own numbers once the equation is on the board.

Heating that raises a temperature fills the kinetic store of the particles, and different materials need different amounts of energy to do it. Specific heat capacity is the energy needed to raise the temperature of one kilogram of a substance by one degree Celsius. Specific means for each kilogram, which makes it a property of the material, not of one particular object. Its symbol is c, and its unit is joules per kilogram per degree Celsius. Water's specific heat capacity is four thousand two hundred joules per kilogram per degree Celsius. Iron's is four hundred and fifty. A high specific heat capacity means more energy for every kilogram and every degree, so the temperature changes more slowly for the same energy. Thermal conductivity is a different property. It describes how fast energy moves through a material, not how much a kilogram needs to warm by a degree. One examiner's report, on a Higher paper, notes that many students confused specific heat capacity with thermal conductivity and thermal insulation. The habit that keeps them apart is one question: is this about how much energy, or how fast it moves through? Conductivity has its own video, Reducing unwanted energy transfers.

The equation says change in thermal energy equals mass times specific heat capacity times change in temperature. Change in thermal energy is delta E, in joules. Mass is m, in kilograms. Specific heat capacity is c, in joules per kilogram per degree Celsius. Change in temperature is delta theta, in degrees Celsius. Delta means change in, and theta is the Greek letter used for temperature. Delta theta is always the final temperature minus the starting one, never the final temperature alone. This equation is printed on the equation sheet, so the skill is picking it out and then using it. Read it as a relationship before any numbers go in. A prediction: double the mass, same c, same rise. What happens to the energy needed? It doubles. Twice the kilograms, each needing the same energy per degree, means twice the energy. Before choosing this equation, ask whether the temperature changes. If it does, this is the equation. If it does not, the substance is changing state, and that needs the latent heat equation instead. One examiner's report, on a Foundation paper, says several students used the latent heat equation, or divided mass times specific heat capacity by the temperature. The fix is to say the equation as a sentence. The energy goes up with the mass, with c and with the change in temperature, so all three multiply. Each rearrangement goes on a line of its own. c equals delta E over m times delta theta. Delta theta equals delta E over m times c. And m equals delta E over c times delta theta.

Back to the two pans. Picture each one receiving fifty-four thousand joules from its burner. Check the units first. Both masses are one point oh kilograms and the energy is in joules, so no conversion is needed this time. The unknown is the change in temperature, so rearrange: delta theta equals delta E divided by m times c. For the iron, that is fifty-four thousand joules divided by one point oh kilograms times four hundred and fifty, which is a hundred and twenty degrees Celsius. The water gets the same fifty-four thousand joules into the same one kilogram. Now you try the water, with c of four thousand two hundred. What is its rise? Fifty-four thousand divided by four thousand two hundred is twelve point nine, which is about thirteen degrees Celsius. Same energy and same mass, but the water's rise is about nine times smaller, because its specific heat capacity is about nine times bigger.

A three hundred and fifty gram block of aluminium is heated from eighteen degrees Celsius to sixty-six. Aluminium's c is nine hundred joules per kilogram per degree Celsius. Convert first. Three hundred and fifty grams is nought point three five oh kilograms. Next comes the change in temperature, on its own line. Sixty-six minus eighteen is forty-eight degrees Celsius. Delta E equals m c delta theta, which is nought point three five kilograms times nine hundred times forty-eight degrees. That gives fifteen thousand one hundred and twenty joules, about fifteen kilojoules. One student skipped a line and multiplied three hundred and fifty by nine hundred by forty-eight, getting fifteen million, one hundred and twenty thousand joules. Now say why. What did that student miss, and how far out is the answer? The mass stayed in grams. A gram is a thousandth of a kilogram, so the answer is a thousand times too big. The Foundation report that named the latent heat mix-up gives a figure for this too: fifty-five per cent of students forgot to convert the mass to kilograms. Another report from the same exam series says most students could select this equation and apply it. The equation was not the problem, and the conversion line was. The habit is a convert line before the equation every time, even when the line says no conversion needed.

Now one for you. Forty-six kilojoules raises the temperature of a two point five kilogram block of an unknown metal from twenty degrees Celsius to sixty. Your job is to find the metal's specific heat capacity. Have a go at this one before I show you. The conversion comes first. Forty-six kilojoules is forty-six thousand joules. The change in temperature is sixty minus twenty, which is forty degrees Celsius. The unknown is c, so rearrange: c equals delta E divided by m times delta theta. That is forty-six thousand divided by two point five times forty. Two point five times forty is a hundred. Forty-six thousand divided by a hundred is four hundred and sixty joules per kilogram per degree Celsius, close to iron or steel.

A graph can show specific heat capacity without any equation at all. Two blocks of equal mass, A and B, are warmed by identical heaters from the same start. Plotted against time, A climbs steeply, and B gently. Which block has the bigger specific heat capacity, A or B? Block B. The same energy gave B the smaller rise, so B needs more energy for each kilogram and each degree. In its report on a Higher paper, one examiner writes that most students picked the wrong block, and that a point taken from the definition of specific heat capacity, instead of from what the graph showed, did not score. The fix is to start the answer with the words, the graph shows, and then compare the two slopes.

Last, a two thousand two hundred watt kettle heats nought point eight oh kilograms of water from fifteen degrees Celsius to a hundred. Assume all of its energy goes into the water. The first lines are the same moves as the aluminium block, so here they are done. The change in temperature is eighty-five degrees, and delta E is two hundred and eighty-five thousand six hundred joules. Power is the energy transferred each second, so energy equals power times time. Now for the part that is new. How long does the kettle take? Rearrange for time, so t equals E divided by P. Two hundred and eighty-five thousand six hundred joules divided by two thousand two hundred watts is a hundred and thirty seconds, a little over two minutes. On the kettle's graph of temperature against time, this equation reads the sloping section. Its gradient is the rise per second, here eighty-five degrees in a hundred and thirty seconds. The flat section at the top, at a hundred degrees, is the water boiling, and this equation cannot describe it. Measuring a specific heat capacity in the lab is a required practical, and the method is in the video Practical: specific heat capacity.

Let's run the recap as questions you answer first. First, what does specific heat capacity mean? Specific heat capacity is the energy needed to raise one kilogram of a substance by one degree Celsius. Now some new numbers. How much energy warms two kilograms of water by five degrees? Two times four thousand two hundred times five is forty-two thousand joules of energy. A different one. A question gives the mass in grams, so what comes first? A convert line comes first: divide the grams by a thousand to get kilograms. Now a fresh pair. Equal blocks get equal energy: one rises ten degrees, one twenty. Which has the higher c? The block that rose ten degrees, because it needed more energy for each degree it rose.

And the two pans on their burners, with such different warming. The same energy raised the iron skillet by about a hundred and twenty degrees and the water by about thirteen, because water's specific heat capacity is about nine times bigger.

If you can convert, find the change in temperature and get the energy in joules, give this a thumbs-up, because you nailed it. If not, leave it un-thumbed and come back, because the rest of the chapter keeps using this, so it comes back round.

Next in the chapter is Specific latent heat of fusion and of vaporisation. Hopefully that's next in your feed, but if not, search for ScholaFly P H oh eight, oh six.

Every other video is on scholafly.com too, easy to search by video code or by keyword. Whatever you're revising, go there and have a look, or, watch the next video.

Related terms

For: AQA GCSE 8463, Edexcel GCSE 1PH0, OCR GCSE J249

On the specification

BoardSpecStatement
AQA GCSE 84634.1.1.3Energy changes in systems
AQA GCSE 84634.3.2.2Temperature changes in a system and specific heat capacity
Edexcel GCSE 1PH014.6Explain how heating a system will change the energy stored within the system and raise its temperature or produce changes of state
Edexcel GCSE 1PH014.7Define the terms specific heat capacity and specific latent heat and explain the differences between them
Edexcel GCSE 1PH014.8Use the equation: change in thermal energy (joule, J) = mass (kilogram, kg) × specific heat capacity (joule per kilogram degree Celsius, J/kg °C) × change in temperature (degree Celsius, °C)
OCR GCSE J249P1.2dDefine the term specific heat capacity and distinguish between it and the term specific latent heat
OCR GCSE J249P1.2eApply the relationship between change in internal energy of a material and its mass, specific heat capacity and temperature change to calculate the energy change involved
OCR GCSE J249PM1.2iApply: change in thermal energy (J) = mass (kg) × specific heat capacity (J/kg °C) × change in temperature (°C)
For teachers

This GCSE Physics lesson teaches specific heat capacity. By the end, students should be able to calculate the energy needed to change the temperature of a mass of material using change in thermal energy = mass x specific heat capacity x temperature change. It works through four worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.