ScholaFly

PH08-04 Physics Watch

Internal energy and what heating does to a system

Watch on YouTube

In this lesson

Internal energy: how to explain internal energy as the total kinetic and potential energy of a system's particles. AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Particles and matter 4 of 10. More at https://scholafly.com

By the end: Explain internal energy as the total kinetic and potential energy of a system's particles, and use it to say whether heating will raise the temperature or change the state.

What it covers

  1. 0:00 Intro: internal energy: heating
  2. 0:39 Heating a system
  3. 1:50 What heating does
  4. 3:47 Ice to warm water
  5. 5:03 Hot cup or warm bath
  6. 6:10 Steam condensing at °C
  7. 6:59 Your turn: internal energy: heating
  8. 8:26 Back to the boiling pan

Key words

About this video

Internal energy and what heating does to a system | GCSE Physics | PH08-04

Internal energy: how to explain internal energy as the total kinetic and potential energy of a system's particles.
AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Particles and matter 4 of 10.
More at https://scholafly.com

Watch first: PH05-01 - https://youtu.be/MWQmB59ub7Q, PH08-01 - https://youtu.be/ignl5CWsYNM
Video code: PH08-04 (search "ScholaFly PH08-04")

#GCSEPhysics #ParticlesAndMatter #InternalEnergyHeating

For teachers
This GCSE Physics lesson teaches internal energy and what heating does to a system. By the end, students should be able to explain internal energy as the total kinetic and potential energy of a system's particles, and use it to say whether heating will raise the temperature or change the state. It works through three worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.

Exam board specification references:
AQA 8463
- 4.3.2.1
Edexcel 1PH0
- 14.6
- 14.7
OCR J249
- P1.2c

Read the transcript

A pan of water is boiling hard on the hob, with the burner turned up full. Where is all that energy going? For ten minutes the burner keeps pouring energy into the pan, and the thermometer in the water reads a hundred degrees Celsius the whole time. The tempting answer is that the water particles keep speeding up and the thermometer cannot show it. They don't, and the thermometer is telling the truth. That stubborn thermometer in the boiling pan has a reason, and it is coming.

Energy is held in stores, and heating is one way of transferring energy into a system's thermal store. A system here means the object, or the group of objects, you have chosen to look at, such as the water in the pan. Internal energy is the total energy stored by the particles of a system, and it is held in two stores. The first is the kinetic energy store. The particles are always moving, whether vibrating, sliding or flying about, and anything moving has kinetic energy. The second is the potential energy store. The particles attract each other, and pulling them further apart against those forces stores energy in their positions. Picture tiny springs joining neighbouring particles. Stretching them stores energy, even though nothing is moving any faster. Internal energy is the kinetic energy plus the potential energy, added up over every particle in the system.

Heating a system increases the energy of its particles, and that does one of two things. Either the temperature rises, or the substance changes state. Temperature goes with the average kinetic energy of the particles. A higher temperature means the particles are moving faster on average. When heating raises the temperature, the energy is going into the kinetic store, and the particles speed up. Now take the boiling pan. Energy is pouring in, and the temperature is not moving at all. Which store is filling: the kinetic store, the potential store, or neither? The potential store. The water's particles are being pulled apart from a liquid into a gas, and that takes energy, while their average speed stays the same. That is true of every change of state. The temperature holds steady, the energy goes into the potential store as the particles are pulled apart, and the average kinetic energy does not change. Cooling runs it backwards. Either the temperature falls, or the substance condenses or freezes at a steady temperature as the potential store empties. One examiner's report, on a Higher paper, notes that most students did not describe the energy of the particles as kinetic and potential energy, and many thought the kinetic energy changed. The fix is to name both stores in every answer, and then say which one is changing.

A block of ice at minus ten degrees Celsius is heated steadily until it is water at twenty degrees. Split the journey into three stages, and for each one ask the same thing: does the temperature change? Stage one, the ice warms from minus ten up to nought degrees. The temperature rises, so the kinetic store is filling. Stage two happens at nought degrees, where the ice melts. Which store fills while the ice melts, and why that one? It is the potential store this time. The temperature holds at nought, so the average kinetic energy is unchanged, and the energy is pulling the particles out of their fixed positions. Stage three, the water warms from nought to twenty degrees. The temperature rises again, so the kinetic store fills again. In all three stages, the internal energy, which is the total, goes up.

Temperature and internal energy are two different things, and here is a case where they point opposite ways. A two hundred and fifty gram cup of tea is at eighty degrees Celsius. A hundred and fifty kilogram bath of water is at forty degrees. Which one holds more internal energy, the hot cup or the warm bath? Pick one, then hold on to it before I reveal it. The bath. The tea is hotter, which means its particles are faster on average. But internal energy is the total over every particle. The bath has six hundred times the mass of the tea, so it has vastly more particles and a far bigger total. That gives each word one job. Temperature is about the average particle, internal energy is the total, and heating is the way energy gets in.

Now steam at a hundred degrees Celsius condenses into water at a hundred degrees. A student writes that the temperature stays the same, so the internal energy stays the same. Now something different. Why is the student wrong to say the internal energy stays the same? A steady temperature only means the average kinetic energy is steady. The particles are coming together, so the potential store decreases, and the internal energy falls. That energy is transferred to the surroundings by heating, which is why condensing steam warms whatever it lands on.

To finish, test yourself on the two stores and the two things heating can do. First, which two stores make up internal energy? The kinetic energy store and the potential energy store of the particles, added together, make up internal energy. Now try some wax. While molten wax sets, what happens to its temperature and internal energy? Its temperature holds steady while it sets, but its internal energy falls, because the potential store empties as the particles lock together. Now back to the particles. What does temperature tell you about the particles? Temperature tells you their average kinetic energy, so a hotter substance has faster particles on average. One more on heating itself. It does one of two things, so what are they? Heating raises the temperature, or it changes the state.

And the boiling pan. The burner's energy goes into the potential store as the water's particles are pulled apart into steam, so the thermometer stays at a hundred.

If you can name both stores and say which one moves at each step, give this a thumbs-up, because you could teach this one. If not, leave it un-thumbed and come back to it, and if that felt fast, that's normal.

Next in the chapter is Specific heat capacity. Hopefully that's next in your feed, but if not, search for ScholaFly P H oh eight, oh five.

Every other video is on scholafly.com too, easy to search by video code or by keyword. Whatever you're revising, go there and have a look, or, watch the next video.

Related terms

For: AQA GCSE 8463, Edexcel GCSE 1PH0, OCR GCSE J249

On the specification

BoardSpecStatement
AQA GCSE 84634.3.2.1Internal energy
Edexcel GCSE 1PH014.6Explain how heating a system will change the energy stored within the system and raise its temperature or produce changes of state
Edexcel GCSE 1PH014.7Define the terms specific heat capacity and specific latent heat and explain the differences between them
OCR GCSE J249P1.2cDescribe how heating a system will change the energy stored within the system and raise its temperature or produce changes of state
For teachers

This GCSE Physics lesson teaches internal energy and what heating does to a system. By the end, students should be able to explain internal energy as the total kinetic and potential energy of a system's particles, and use it to say whether heating will raise the temperature or change the state. It works through three worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.