ScholaFly

PH03-06 Physics Watch

Elastic and inelastic deformation

Watch on YouTube

In this lesson

In this video you'll learn about elastic and inelastic deformation for GCSE Physics. Watch first: {{video:PH03-01}}

By the end: Tell an elastic deformation from an inelastic one, and say why changing an object's shape always needs more than one force.

What it covers

  • Changing an object's SHAPE - stretching, bending or compressing - always needs MORE THAN ONE FORCE; a single force just moves the object
  • Naming the second force in each case: two hands squeezing, a hook and a hanging weight, a wall and a push, the ground and a foot
  • Elastic deformation: the object returns to its original shape and length when the forces are removed
  • Inelastic deformation, also called plastic deformation: it does not - some change is kept
  • Using the exam's own words in the answer - elastic, inelastic, plastic, returns to its original shape
  • The elastic limit, described qualitatively, as the load past which the object stops coming back
  • Examples on both sides of the line: a spring, a rubber band, a diving board and a steel beam are elastic; a paperclip, a crushed can, modelling clay and a dented car panel are inelastic
  • Energy is stored in an object that has been stretched elastically - NAMED here in one sentence, calculated nowhere in this video

Key words

About this video

Elastic and Inelastic (Plastic) Deformation | GCSE Physics

Elastic and inelastic (plastic) deformation: how to tell them apart and why changing an object's shape needs more than one force.
AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Forces 6 of 9.
Full Forces playlist: https://www.youtube.com/playlist?list=PLJ_0FIkoruwU
More at https://scholafly.com

Watch first: GCSE Physics - Contact and non-contact forces | Forces 1/9 (2026/27 exams) - https://youtu.be/yOTHXt99lnQ
Video code: PH03-06 (search "ScholaFly PH03-06")

Videos in this chapter:
PH03-00 Forces and their effects - Intro
PH03-01 Contact and non-contact forces: https://youtu.be/yOTHXt99lnQ
PH03-02 Weight, mass and gravitational field strength: https://youtu.be/DGTydFcA_qs
PH03-03 Resultant forces: https://youtu.be/N26nz5UvFRo
PH03-04 Free body diagrams (Higher): https://youtu.be/4f8iNATFIic
PH03-05 Resolving forces with a scale vector diagram (Higher): https://youtu.be/KIBvAmzD1ag
PH03-06 Elastic and inelastic deformation: https://youtu.be/Hs1iARG7ZF0
PH03-07 Hooke's law and the spring constant: https://youtu.be/9guyrOPetdY
PH03-08 Moments and the principle of moments (triple)
PH03-09 Levers and gears (triple)

#GCSEPhysics #Forces #ElasticDeformation

For teachers
This GCSE Physics lesson teaches elastic and inelastic deformation. By the end, students should be able to tell an elastic deformation from an inelastic one, and say why changing an object's shape always needs more than one force. It works through three worked examples and the mistakes examiners report, and suits Foundation and Higher tier students on both GCSE Physics and Combined Science courses.

Exam board specification references:
AQA GCSE Physics (8463), also AQA GCSE Combined Science: Trilogy (8464)
- 4.5.3 Forces and elasticity
Pearson Edexcel Level 1/Level 2 GCSE (9-1) in Physics (1PH0), also Edexcel GCSE Combined Science (1SC0)
- 15.1 Explain, using springs and other elastic objects, that stretching, bending or compressing an object requires more than one force
- 15.2 Describe the difference between elastic and inelastic distortion
OCR GCSE (9-1) Gateway Science Suite - Physics A (J249), also OCR Gateway Combined Science A (J250)
- P2.3a Explain that to stretch, bend or compress an object, more than one force has to be applied
- P2.3b Describe the difference between elastic and plastic deformation (distortions) caused by stretching forces

Read the transcript

Bend a paperclip a little, and it springs straight back. Bend it a bit further, and it stays bent. Same metal, same wire, same fingers, and nothing visible happened in between. Somewhere between those two bends there was a line, and once you crossed it, the paperclip could not come back. Finding that line starts with a fact about every change of shape: it never takes only one force.

Here is the sixth video of nine, and every student needs it, whichever tier. If forces still need their names, Contact and non-contact forces is where they got them.

Push a box with one finger across a slippery floor, and it slides away without changing shape. One force on its own moves an object. To stretch, bend or squash something, you need at least two forces, acting on it in different places. Squeeze a sponge between finger and thumb, and two pushes meet in the middle. Here is a student's sentence about a spring. The spring stretched when I hung a weight on it, so one force changed its shape. That sentence is marked wrong, with a cross beside it. What is wrong with that sentence? It misses the second force. The hook at the top pulls up on the spring while the weight pulls down at the bottom, and the two together stretch it. A corrected version reads: the spring stretched because two forces acted on it, the weight pulling down and the hook pulling up.

Now the two kinds of deformation. Elastic deformation means the object returns to its original shape and length when the forces are removed. Inelastic deformation means it does not: some of the change stays. Inelastic deformation is also called plastic deformation. An elastic object comes back. A plastic object keeps some of the change. Two examples to place every new one beside: a steel spring is elastic, and a lump of Blu Tack is plastic. Elastic is about coming back, not about how far it went. A steel diving board barely bends, and it is elastic. A rubber band stretched until it hangs loose is not. A steel ruler is bent slightly and let go, and it springs flat. Elastic or inelastic? Elastic. It returned to its original shape, however stiff it felt, and that return is the whole test. Say the idea, then the word. It went back to its shape: that is elastic deformation. It stayed changed: that is inelastic, or plastic, deformation. One examiner's report on a Foundation paper records that candidates who achieved a Level 2 often demonstrated knowledge of plastic and elastic deformation but did not always use these terms. The fix is to write the term every time, beside the description. The words are where the credit sits.

Now four everyday objects. The steel spring inside a ballpoint pen is squashed between your thumb on the button and the body of the pen, and it springs back, so it is elastic. A lump of Blu Tack is squeezed between finger and thumb, and it stays squashed. Inelastic, or plastic. A squash ball is squeezed hard between a finger and a thumb, so it dents in. Let go, and it pops back round. Answer both halves this time: the kind of deformation, and the two forces behind it. Elastic or inelastic, and which two forces deformed the squash ball? Elastic, even though it was squashed out of shape. The finger pushes one side and the thumb pushes the other, and it returns to its original shape. Next, a car bonnet after a low-speed bump into a bollard. Which kind of deformation is the bonnet's dent, and which two forces made it? Inelastic. The post shoves the front of the bonnet in, everything behind it holds it back, and the dent stays. One examiner's report on a Higher paper notes that some candidates confused the properties of elastic with plastic and so thought the spring had plastic properties. The habit that stops the swap: place each new object beside the steel spring or the Blu Tack before you name it. Ask whether it comes back like the spring or stays like the Blu Tack.

Back to the line inside the paperclip. A copper wire is loaded with two newtons, and when the load comes off, it returns to its original length. Then it is loaded with eight newtons. When that load comes off, the wire stays three millimetres longer than it started. Two loads, two behaviours, and each behaviour has its proper name. Which words describe each of the two deformations? At two newtons, elastic deformation: the wire returned to its original length. At eight newtons, inelastic, or plastic, deformation: the wire kept some of its stretch. Somewhere between those loads sits the line the paperclip crossed. What is true about eight newtons that is not true about two? Eight newtons is past the wire's elastic limit. The elastic limit is the load beyond which an object no longer returns to its original shape. A second, different limit arrives in the video on Hooke's law and the spring constant. It is not the same thing as the elastic limit, and the two are never merged. One examiner's report on a Higher paper puts it this way. Answers referring to elastic limit were acceptable, but the terms were not always used correctly. It is essential that students learn correct terminology. The fix: define the elastic limit by what the object does, the load past which it stops coming back, and keep that sentence for that limit alone. One more thing a stretched spring does: it stores energy while it is stretched elastically, and gives it back as it springs back. The video on elastic potential energy puts a number on that. And there is encouragement in one examiner's report on a Foundation paper. Around half of all candidates described plastic deformation and this almost always led on to a description of elastic deformation, or vice versa.

Three objects to sort before you go, two of them new. A trampoline sags under a jumper, then springs back flat. Which kind of deformation? Elastic, because it returns to its original shape. The jumper pushes down, and the frame pulls on its edges. Now some clay: pressed flat, it stays flat. Which kind of deformation is that? It is inelastic, also called plastic. It keeps the change, the same way the Blu Tack did. A wire recovers after five newtons but not after nine. Where is its elastic limit? Somewhere between five and nine newtons. Below it the wire comes back, and above it some stretch stays. And the paperclip: the first small bend was elastic. The bigger bend went past its elastic limit, so the second bend stayed.

If you could teach this one to a friend, mark it with a thumbs up and let it drop off your list. If elastic and plastic still swap places, save it, then explain the paperclip out loud to someone once, and it holds.

Next in the chapter: Hooke's law and the spring constant.

For more, visit scholafly.com, or watch the next video.

Related terms

For: AQA GCSE 8463, Edexcel GCSE 1PH0, OCR GCSE J249

On the specification

BoardSpecStatement
AQA GCSE 84634.5.3Forces and elasticity
Edexcel GCSE 1PH015.1Explain, using springs and other elastic objects, that stretching, bending or compressing an object requires more than one force
Edexcel GCSE 1PH015.2Describe the difference between elastic and inelastic distortion
OCR GCSE J249P2.3aExplain that to stretch, bend or compress an object, more than one force has to be applied
OCR GCSE J249P2.3bDescribe the difference between elastic and plastic deformation (distortions) caused by stretching forces
For teachers

This GCSE Physics lesson teaches elastic and inelastic deformation. By the end, students should be able to tell an elastic deformation from an inelastic one, and say why changing an object's shape always needs more than one force. It works through three worked examples and the mistakes examiners report, and suits Foundation and Higher tier students on both GCSE Physics and Combined Science courses.