PH03-07 Physics Watch
Hooke's law and the spring constant
In this lesson
In this video you'll learn about hooke's law and the spring constant for GCSE Physics. Watch first: {{video:PH03-06}}
By the end: Calculate a spring constant from a force and an extension, and read off a force-extension graph the point where the spring stops obeying Hooke's law.
What it covers
- EXTENSION is the increase in length, not the length: measure the natural length first and subtract, every time, on its own line
- Force = spring constant x extension: quantity, symbol and unit for all three - newtons, newtons per metre, and metres
- Converting centimetres and millimetres to METRES before substituting, on a CONVERT line of its own
- The rearrangements k = F / e and e = F / k, each written out as its own line
- What k MEANS as a rate: the newtons needed for each metre of stretch, so a big k is a stiff spring
- Force-extension graphs: force up the side, extension along the bottom, and a straight line THROUGH THE ORIGIN while Hooke's law holds
- What directly proportional actually means - a ratio that stays the same - and why as the force increases the extension increases is not it
- Reading k as the GRADIENT of that line, with the unit falling out of the two axes
- The limit of proportionality: the load at which the line stops being straight, and finding it on a graph
- Linear and non-linear force-extension behaviour, described in those words
- Compression as well as extension - the relationship behaves the same way
- The boards' own limiter, printed on the atom: this is limited to stationary objects only
Key words
About this video
Hooke's law and the spring constant | GCSE Physics
How to use Hooke's law and the spring constant, F = ke, to find force or extension, and read the limit of proportionality off a force-extension graph.
AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Forces 7 of 9.
Full Forces playlist: https://www.youtube.com/playlist?list=PLJ_0FIkoruwU
More at https://scholafly.com
Watch first: Elastic and Inelastic (Plastic) Deformation - https://youtu.be/Hs1iARG7ZF0
Video code: PH03-07 (search "ScholaFly PH03-07")
Videos in this chapter:
PH03-00 Forces and their effects - Intro
PH03-01 Contact and non-contact forces: https://youtu.be/yOTHXt99lnQ
PH03-02 Weight, mass and gravitational field strength: https://youtu.be/DGTydFcA_qs
PH03-03 Resultant forces: https://youtu.be/N26nz5UvFRo
PH03-04 Free body diagrams (Higher): https://youtu.be/4f8iNATFIic
PH03-05 Resolving forces with a scale vector diagram (Higher): https://youtu.be/KIBvAmzD1ag
PH03-06 Elastic and inelastic deformation: https://youtu.be/Hs1iARG7ZF0
PH03-07 Hooke's law and the spring constant: https://youtu.be/9guyrOPetdY
PH03-08 Moments and the principle of moments (triple)
PH03-09 Levers and gears (triple)
#GCSEPhysics #Forces #HookesLaw
For teachers
This GCSE Physics lesson teaches Hooke's law and the spring constant. By the end, students should be able to calculate a spring constant from a force and an extension, and read off a force-extension graph the point where the spring stops obeying Hooke's law. It works through four worked examples and the mistakes examiners report, and suits Foundation and Higher tier students on both GCSE Physics and Combined Science courses.
Exam board specification references:
AQA GCSE Physics (8463), also AQA GCSE Combined Science: Trilogy (8464)
- 4.5.3 Forces and elasticity
Pearson Edexcel Level 1/Level 2 GCSE (9-1) in Physics (1PH0), also Edexcel GCSE Combined Science (1SC0)
- 15.3 Recall and use the equation for linear elastic distortion including calculating the spring constant: force exerted on a spring (newton, N) = spring constant (newton per metre, N/m) × extension (metre, m)
- 15.5 Describe the difference between linear and non-linear relationships between force and extension
OCR GCSE (9-1) Gateway Science Suite - Physics A (J249), also OCR Gateway Combined Science A (J250)
- P2.3c Describe the relationship between force and extension for a spring and other simple systems
- P2.3d Describe the difference between linear and non-linear relationships between force and extension
- P2.3e Calculate a spring constant in linear cases
- PM2.3i Recall and apply: force exerted by a spring (N) = spring constant (N/m) × extension (m)
Read the transcript
A kitchen scale, a luggage scale and a car's suspension are all the same machine underneath: a spring, with a number written on it. Load one past a point it does not advertise, and it keeps giving you readings. They are simply wrong, and nothing on the display tells you that anything has changed. Finding that point starts with measuring a stretch properly, and that is one subtraction.
This is video seven of nine, and Foundation or Higher, all of it is examined. Elastic and inelastic deformation comes before it, with the two kinds of deformation this video puts numbers on.
The extension of a spring is the increase in its length, not the length itself. Measure the natural length first, the length with no load, and take it away from the stretched length. Ten centimetres unloaded, fifteen centimetres loaded. What is the extension? Five centimetres, fifteen minus ten. On a convert line, that is nought point nought five metres. Hooke's law links the force to that extension. In words: force equals spring constant multiplied by extension. In symbols, F equals k e. Force, F, in newtons. Spring constant, k, in newtons per metre. Extension, e, in metres. The same rule holds when a spring is squashed instead of stretched. The spring constant is the number of newtons needed for each metre of stretch. A big k means a stiff spring. This is all for a spring held still, never one that is bouncing.
A spring has a natural length of eight point nought centimetres. A load of six point nought newtons stretches it to a total length of twenty-two point nought centimetres. First line: the extension, on a line of its own. What is the extension of this spring, in centimetres? Twenty-two point nought take away eight point nought is fourteen point nought centimetres. Second line: the conversion, on its convert line, because the answer box is already labelled newtons per metre. What goes on the convert line, in metres? Divide by a hundred: fourteen point nought centimetres is nought point one four metres. Third line, the rearrangement, written out: divide both sides of F equals k e by e, and k equals F over e. Fourth line: six point nought newtons, divided by nought point one four metres, is about forty-two point nine newtons per metre. To two significant figures, forty-three newtons per metre. A student divides six by fourteen and writes nought point four three newtons per metre. It is marked wrong. What went wrong in that student's working? The fourteen was still in centimetres, never converted. Divided that way, the result comes out a hundred times too small. One examiner's report on a Higher paper describes the winning routine. Higher ability candidates tended to perform the conversion first from twenty centimetres to nought point two metres, and then divide seven by nought point two to give the correct answer of thirty-five newtons per metre. Convert first, then divide. Every calculation in this video uses that order.
Now the graph. Hang loads on a spring and record each extension. Force goes up the side, extension along the bottom. Four newtons gives nought point one metres. Eight newtons gives nought point two. Twelve newtons gives nought point three. Fourteen newtons gives nought point four, and sixteen newtons gives nought point five five. Add a third column: force divided by extension. For the first row that is forty newtons per metre. Which row is the first where force over extension stops being forty? Fourteen newtons. Fourteen over nought point four is thirty-five, and sixteen over nought point five five is about twenty-nine. That steady forty is what directly proportional means: the ratio of the two quantities stays the same. On the graph it shows as a straight line through the origin. One examiner's report on a Higher paper notes that students who attempted to answer in terms of direct proportionality often simply stated that as the force increased, the extension increased. This answer scored zero. The fix is to say both halves: the ratio stays the same, so the graph is a straight line through the origin. Leave out the origin and the description is incomplete. The gradient of that straight part is the spring constant: rise in newtons over run in metres. Take the point at twelve newtons. What gradient does it give? Twelve over nought point three is forty newtons per metre, the same forty as the table. The habit that makes it stick: draw the gradient triangle, label its sides in newtons and in metres, and divide the labels as well as the numbers. Newtons over metres is newtons per metre.
Now lay a straight edge along the line and slide it up from the origin. At what force does the line leave the straight edge? At twelve newtons. That point is the limit of proportionality: the load beyond which force and extension stop being directly proportional. Up to there the behaviour is linear, a straight line. Past it, the behaviour is non-linear, and F equals k e no longer applies. The limit of proportionality is not the elastic limit from the video on elastic and inelastic deformation. One is where the line bends, the other is where the spring stops coming back. Try this with the same graph. The line is straight up to twelve newtons, and at ten newtons the extension is nought point two five metres. Ten divided by nought point two five gives a spring constant of forty newtons per metre. Check the load against the limit first, then use the spring constant. What would the extension be at thirty newtons? It cannot be worked out. Thirty newtons is past the limit of proportionality, where F equals k e has stopped holding, so no number from it would be right. That is the kitchen scale from the start. Past its limit of proportionality, the stretch stops matching the load, and the display goes on reading as if nothing had changed.
Two springs, side by side. Spring X needs four point nought newtons to stretch it five point nought centimetres. Spring Y needs four point nought newtons to stretch it twenty point nought centimetres. Convert first, then divide, for each spring in turn. What are the two spring constants, and which spring is stiffer? X: four over nought point nought five is eighty newtons per metre. Y: four over nought point two is twenty newtons per metre. X is stiffer, because it needs more newtons for each metre. Last one. A spring obeys Hooke's law up to nine point nought newtons, and its spring constant is one hundred and fifty newtons per metre. The load is six point nought newtons. That load is below the limit, so Hooke's law holds, and the rearrangement is e equals F over k. That much is done. What is the extension, in metres and then in millimetres? Six divided by one hundred and fifty is nought point nought four metres. Multiply by a thousand, and that is forty millimetres. One more spring equation exists: elastic potential energy equals a half times spring constant times extension squared. The test is the unit. Newtons wanted means F equals k e. Joules wanted means the energy equation, and that belongs to the video on elastic potential energy. One examiner's report on a Foundation paper, about an energy question, says the most common misunderstanding was not selecting the correct equation from the data sheet, and then multiplying the spring constant by the extension. The fix is to read the unit the answer line wants before you pick an equation. Measuring a spring's extension yourself is a required practical, and the method is in the video called Practical: force and extension of a spring.
Three to try, and the first spring is one you have not met. A spring stretches four centimetres under two newtons. What is its spring constant? Fifty newtons per metre. Convert four centimetres to nought point nought four metres, then two divided by nought point nought four. Now in words: what does directly proportional mean for force and extension? Their ratio stays the same, so the graph is a straight line through the origin. Not only that both go up. One last graph: it bends at fifteen newtons. Can F equals k e give the stretch at twenty? No. Twenty newtons is past the limit of proportionality, where Hooke's law no longer holds. And that is why the luggage scale stays honest only below its limit: inside it, each newton adds the same stretch.
Once Hooke's law is in the bag, leave a thumbs up as your reminder that this one can be skipped. If the conversions still trip you, keep it saved for later. It often lands on a second viewing.
Next in the chapter, for separate physics: Moments and the principle of moments.
For more, visit scholafly.com, or watch the next video.
Related terms
For: AQA GCSE 8463, Edexcel GCSE 1PH0, OCR GCSE J249
On the specification
| Board | Spec | Statement |
|---|---|---|
| AQA GCSE 8463 | 4.5.3 | Forces and elasticity |
| Edexcel GCSE 1PH0 | 15.3 | Recall and use the equation for linear elastic distortion including calculating the spring constant: force exerted on a spring (newton, N) = spring constant (newton per metre, N/m) × extension (metre, m) |
| Edexcel GCSE 1PH0 | 15.5 | Describe the difference between linear and non-linear relationships between force and extension |
| OCR GCSE J249 | P2.3c | Describe the relationship between force and extension for a spring and other simple systems |
| OCR GCSE J249 | P2.3d | Describe the difference between linear and non-linear relationships between force and extension |
| OCR GCSE J249 | P2.3e | Calculate a spring constant in linear cases |
| OCR GCSE J249 | PM2.3i | Recall and apply: force exerted by a spring (N) = spring constant (N/m) × extension (m) |
For teachers
This GCSE Physics lesson teaches Hooke's law and the spring constant. By the end, students should be able to calculate a spring constant from a force and an extension, and read off a force-extension graph the point where the spring stops obeying Hooke's law. It works through four worked examples and the mistakes examiners report, and suits Foundation and Higher tier students on both GCSE Physics and Combined Science courses.