ScholaFly

PH03-05 Physics Watch

Resolving forces with a scale vector diagram (Higher)

Watch on YouTube

In this lesson

In this video you'll learn about scale vector diagrams (H) for GCSE Physics.

By the end: Find the resultant of two forces that are not in a straight line by drawing them to scale, and give its size in newtons and its direction as a measured angle.

What it covers

  1. 5:54 Scale vector diagrams (H): the method also runs backwards

Key words

About this video

Resolving forces with a scale vector diagram (Higher) | GCSE Physics

How to find a resultant force by drawing a scale vector diagram (resolving forces), with angles, the method and worked examples.
AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Forces 5 of 9.
Full Forces playlist: https://www.youtube.com/playlist?list=PLJ_0FIkoruwU
More at https://scholafly.com

Watch first: Scalars and Vectors: Magnitude and Direction - https://youtu.be/Z6zOwqb1OYk, Resultant Forces (Net Force) in a Straight Line - https://youtu.be/N26nz5UvFRo
Video code: PH03-05 (search "ScholaFly PH03-05")

Videos in this chapter:
PH03-00 Forces and their effects - Intro
PH03-01 Contact and non-contact forces: https://youtu.be/yOTHXt99lnQ
PH03-02 Weight, mass and gravitational field strength: https://youtu.be/DGTydFcA_qs
PH03-03 Resultant forces: https://youtu.be/N26nz5UvFRo
PH03-04 Free body diagrams (Higher): https://youtu.be/4f8iNATFIic
PH03-05 Resolving forces with a scale vector diagram (Higher): https://youtu.be/KIBvAmzD1ag
PH03-06 Elastic and inelastic deformation: https://youtu.be/Hs1iARG7ZF0
PH03-07 Hooke's law and the spring constant: https://youtu.be/9guyrOPetdY
PH03-08 Moments and the principle of moments (triple)
PH03-09 Levers and gears (triple)

#GCSEPhysics #Forces #ScaleVectorDiagramsH

For teachers
This GCSE Physics lesson teaches resolving forces with a scale vector diagram (Higher). By the end, students should be able to find the resultant of two forces that are not in a straight line by drawing them to scale, and give its size in newtons and its direction as a measured angle. It works through three worked examples and the mistakes examiners report.

Exam board specification references:
AQA GCSE Physics (8463), also AQA GCSE Combined Science: Trilogy (8464)
- 4.5.1.4c Resultant forces
Pearson Edexcel Level 1/Level 2 GCSE (9-1) in Physics (1PH0), also Edexcel GCSE Combined Science (1SC0)
- 9.3 Use vector diagrams to illustrate resolution of forces, a net force, and equilibrium situations (scale drawings only)
OCR GCSE (9-1) Gateway Science Suite - Physics A (J249), also OCR Gateway Combined Science A (J250)
- P2.2e Use vector diagrams to illustrate resolution of forces, a net force (resultant force), and equilibrium situations

Read the transcript

Two people drag a stuck car, with a rope each, pulling four hundred newtons apiece. Side by side, the car feels eight hundred newtons. Spread them out to either side of the road, still pulling just as hard, and the car feels less. There is an angle at which two people pulling their hardest achieve nothing at all. Working out how much less takes a ruler, a protractor and a scale, and it starts with why plain adding fails.

This is the fifth of nine, and the second Higher video in the chapter. Resultant forces is the step before it, and Scalars and vectors explains what makes a force a vector.

A force is a vector, so its direction is part of the quantity. Add two forces at an angle as plain numbers, and you throw the directions away. Take thirty newtons and forty newtons pulling the same way. Drawn to scale, tip to tail, one after the other, the line runs seven centimetres at one centimetre to ten newtons. That is seventy newtons, the same answer as adding. A drawing like this is a scale vector diagram, and along a line it agrees with the arithmetic. Now turn the forty newtons through a right angle, and draw it from the tip of the thirty. Will the resultant be seventy newtons, ten newtons, or something else? Something else. The closing line measures five centimetres, which is fifty newtons, and neither adding nor taking away could give you that. Forces along one straight line, use arithmetic. Forces at an angle, use a ruler and a protractor. One examiner's report on a Higher paper saw that straight-line habit used at an angle. Many incorrect responses simply stated the difference in the two forces, suggesting that students were familiar with forces acting in a straight line. The fix is to check the angle before you touch a number. No straight line between the forces means the drawing does the work.

Now the full method, on a sledge. A rope pulls it with two hundred and fifty newtons at thirty degrees above the horizontal, and friction pulls back along the ground with ninety newtons. The sledge's weight and the snow's push act too, but this question only asks you to combine these two. Step one is the scale, written down before any line exists. Size it so the biggest force is about eight to ten centimetres long. Here the question gives one centimetre to twenty-five newtons. Each arrow's length comes from dividing its force by the newtons in one centimetre. How long is the rope's arrow, and how long is the friction arrow? Two hundred and fifty divided by twenty-five is ten centimetres for the rope. Ninety divided by twenty-five is three point six centimetres for the friction. Step two: draw the rope's arrow, ten centimetres long, at thirty degrees to the horizontal, with its arrowhead drawn in the same stroke. Step three: from the tip of that arrow, draw the friction arrow, three point six centimetres, pointing straight back. Arrowhead on, straight away. Step four: the resultant runs from the start of the first arrow to the tip of the last one, and it gets an arrowhead too. One report on a Higher paper notes that it was rare for the resultant force to have an arrow drawn. The habit that fixes it: a line and its arrowhead are one action. No line is ever finished without its head. Step five is measuring the finished drawing, which stays in front of you the whole time. The resultant line measures seven point one centimetres. That length goes back through the same scale it came from. What force does a line of seven point one centimetres stand for? Seven point one times twenty-five is one hundred and seventy-seven and a half. About one hundred and eighty newtons, which is as close as a drawing can honestly give. The direction is an angle, measured from a reference you name first. Name the horizontal ground, put the protractor at the start of the line, and read about forty-five degrees. The answer is about one hundred and eighty newtons, at about forty-five degrees above the horizontal. That angle matters. The same report adds that few students measured the direction of the force from the diagram and gave vague compass directions with no numerical angle. It also records that values for the tension force were often obtained by calculation rather than scale drawing. The fix for both: name the reference, then measure a number of degrees off your own drawing. The drawing is the answer, so the answer comes from the drawing. And the scale choice is not a formality. Squash that rope's arrow to two centimetres, and every millimetre of slip becomes twelve and a half newtons of error.

The method also runs backwards. Resolving a force means splitting it into two forces at right angles, called components, that together have the same effect. A single force of sixty newtons acts at forty degrees to the horizontal. The scale is one centimetre to ten newtons, so the arrow is six centimetres long, at forty degrees. From the tip, drop a line straight down to the horizontal. That makes a right-angled triangle, and its two short sides are the components. With the ruler laid along the bottom side, it reads four point six centimetres. What is the horizontal component, to the nearest newton? Forty-six newtons, horizontally, since each centimetre stands for ten newtons. The upright side measures three point nine centimetres, so the vertical component is thirty-nine newtons, straight up. One drawing, the scale used twice. Another report, on a scale drawing of two forces at right angles, puts the cost plainly. Only the higher ability candidates gained all three marks from a carefully drawn scaled diagram showing the forces acting at right angles to each other. The fix is care, not cleverness: a sharp pencil, the protractor's centre on the right point, and the scale written first.

Last, a balance. Three ropes pull on a metal ring: eighty newtons due east, sixty newtons due north, and a third rope whose force is unknown. The ring does not move. The scale is one centimetre to twenty newtons. The east arrow, four centimetres, is drawn, and the north arrow, three centimetres, is drawn from its tip. That part is done. Here is the new step. When forces are balanced, the arrows drawn tip to tail make a closed shape. Where must the third arrow end, if the ring stays still? Back at the very start of the first arrow. The drawing closes on itself, so the resultant is zero. That closing arrow measures five centimetres, which is one hundred newtons. Name due west as the reference, and the protractor reads thirty-seven degrees, measured towards the south. The third force is one hundred newtons, at thirty-seven degrees south of due west. A wrong method would leave a gap you could see. And the drawing earns credit from its first line. One examiner's report calls this an accessible question for those who had drawn vector diagrams, with one mark being allocated for the very basic scale diagram.

Three quick checks now, and two of them use forces this video never drew. Why can't thirty and forty newtons at right angles be added as numbers? Because force is a vector, and plain numbers ignore its direction. At an angle, only a scale drawing gives the resultant. Now choose a scale: biggest force three hundred newtons. One centimetre to ten, or forty? One centimetre to forty, which makes that arrow seven and a half centimetres. The other would need thirty centimetres, off the page. One more. A line measures six point four centimetres at one to twenty-five. What force? One hundred and sixty newtons, since six point four times twenty-five is one hundred and sixty. Its direction still needs an angle from a named reference. And the stuck car: two four hundred newton ropes, a hundred and twenty degrees apart, at one centimetre to fifty. The closing line measures eight centimetres, four hundred newtons. Spread the ropes to opposite sides, and the drawing closes on itself: nothing.

Fully understood it? Then the like button is your marker, and this video stays off your list of things to watch again. If the drawings still go wrong, save it, and do three with a real ruler; by the third, the method feels ordinary.

Next in the chapter: Elastic and inelastic deformation.

For more, visit scholafly.com, or watch the next video.

Related terms

For: AQA GCSE 8463, Edexcel GCSE 1PH0, OCR GCSE J249

On the specification

BoardSpecStatement
AQA GCSE 84634.5.1.4cResultant forces
Edexcel GCSE 1PH09.3Use vector diagrams to illustrate resolution of forces, a net force, and equilibrium situations (scale drawings only)
OCR GCSE J249P2.2eUse vector diagrams to illustrate resolution of forces, a net force (resultant force), and equilibrium situations
For teachers

This GCSE Physics lesson teaches resolving forces with a scale vector diagram (Higher). By the end, students should be able to find the resultant of two forces that are not in a straight line by drawing them to scale, and give its size in newtons and its direction as a measured angle. It works through three worked examples and the mistakes examiners report.