PH03-04 Physics Watch
Free body diagrams (Higher)
In this lesson
In this video you'll learn about free body diagrams (H) for GCSE Physics. Watch first: {{video:PH03-03}}
By the end: Draw a free body diagram showing every force acting on one isolated object, and read off it whether those forces are balanced.
What it covers
- Isolating ONE object, named out loud before anything is drawn, and rubbing everything else out
- The object drawn as a plain box or a dot, deliberately not as a picture of itself
- Every force drawn as an arrow starting at the object, labelled with what the force is AND what exerts it
- The four that cover almost every GCSE case: weight (always down, always from the Earth), the normal contact force (perpendicular to the surface), friction or drag (opposite the motion), and the applied push or the tension
- Only forces ACTING ON the isolated object go on its diagram - the forces it exerts on other things belong on their diagrams
- The boards' own limiter: QUALITATIVE ONLY. Arrow lengths show which force is bigger; no ruler, no scale, no measured value
- Reading balanced or unbalanced straight off the picture, and writing the resultant underneath in words
- A checking routine run out loud: does every arrow name an agent, and is any arrow's partner sitting on the same diagram
- Drawing the SAME situation twice, one diagram per object, so a viewer can see where the partner force went
Key words
About this video
Free Body Diagrams (Force Diagrams), Higher | GCSE Physics
How to draw a free body (force) diagram for one object, read whether its forces are balanced, and avoid the common exam mistakes.
AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Forces 4 of 9.
Full Forces playlist: https://www.youtube.com/playlist?list=PLJ_0FIkoruwU
More at https://scholafly.com
Watch first: Resultant Forces (Net Force) in a Straight Line - https://youtu.be/N26nz5UvFRo
Video code: PH03-04 (search "ScholaFly PH03-04")
Videos in this chapter:
PH03-00 Forces and their effects - Intro
PH03-01 Contact and non-contact forces: https://youtu.be/yOTHXt99lnQ
PH03-02 Weight, mass and gravitational field strength: https://youtu.be/DGTydFcA_qs
PH03-03 Resultant forces: https://youtu.be/N26nz5UvFRo
PH03-04 Free body diagrams (Higher): https://youtu.be/4f8iNATFIic
PH03-05 Resolving forces with a scale vector diagram (Higher): https://youtu.be/KIBvAmzD1ag
PH03-06 Elastic and inelastic deformation: https://youtu.be/Hs1iARG7ZF0
PH03-07 Hooke's law and the spring constant: https://youtu.be/9guyrOPetdY
PH03-08 Moments and the principle of moments (triple)
PH03-09 Levers and gears (triple)
#GCSEPhysics #Forces #FreeBodyDiagramsH
For teachers
This GCSE Physics lesson teaches free body diagrams (Higher). By the end, students should be able to draw a free body diagram showing every force acting on one isolated object, and read off it whether those forces are balanced. It works through three worked examples and the mistakes examiners report.
Exam board specification references:
AQA GCSE Physics (8463), also AQA GCSE Combined Science: Trilogy (8464)
- 4.5.1.4b Resultant forces
Pearson Edexcel Level 1/Level 2 GCSE (9-1) in Physics (1PH0), also Edexcel GCSE Combined Science (1SC0)
- 9.4 Draw and use free body force diagrams
- 9.5 Explain examples of the forces acting on an isolated solid object or a system where several forces lead to a resultant force on an object and the special case of balanced forces when the resultant force is zero
OCR GCSE (9-1) Gateway Science Suite - Physics A (J249), also OCR Gateway Combined Science A (J250)
- P2.2f Describe examples of the forces acting on an isolated solid object or system
- P2.2g Describe, using free body diagrams, examples where two or more forces lead to a resultant force on an object
- P2.2h Describe, using free body diagrams, examples of the special case where forces balance to produce a resultant force of zero (qualitative only)
Read the transcript
A cable car hangs still, halfway across a valley. Draw the forces on it the way it looks, and you end up drawing the cable, the pylons, the passengers and the view. The drawing that scores is a box with two arrows on it. The picture that looks least like a cable car is the right one. Getting there is a method of throwing things away, and it starts with naming one object.
Video four of nine, and the first of two Higher videos in this chapter. If adding forces along a line is still shaky, Resultant forces is the step before this.
A free body diagram shows every force acting on one object, and nothing else. Free body means the object is cut free from everything around it. Step one: name the one object out loud, before you draw anything. Step two: throw the rest of the picture away, and shrink the object to a plain box or a dot. Step three: ask two questions. Is it touching anything? Is it in a field? Every touch gives a contact force, and the Earth's field gives the weight. Ask those two questions of the cable car. What does each one give you? It touches the arm that hangs it from the cable, so the arm pulls it up. And gravity pulls it down, which is the second arrow. Step four: draw each force as an arrow starting at the box, labelled with what the force is and what exerts it. That second part is the agent. The diagram is qualitative: no ruler and no scale. A longer arrow means a bigger force, and two arrows of equal length mean equal forces.
Now a steel cube hangs at rest on the end of a spring, and the spring hangs from a hook in the ceiling. That takes two diagrams, one for each object. First diagram: the cube. The ceiling, the hook and the spring all go, and the cube becomes a box. Which forces act on the cube, and what exerts each one? Two. Its weight, from the Earth, downwards, and the pull of the spring on the cube, upwards. Equal lengths, because the cube hangs still. There is no air resistance, because the cube is not moving through the air, so nothing could exert it. Any upthrust from the air is far too small to draw, and upthrust has its own video, on floating and sinking. Second diagram: the spring. Treat it as light, so its own weight is too small to draw. Now the spring: which forces act on the spring, and what exerts each? The pull of the hook, upwards, and the pull of the cube, downwards. The cube's weight does not appear: the Earth pulls on the cube, not on the spring. Look where the partner went. The spring pulls up on the cube, and the cube pulls down on the spring. Each half sits on its own object's diagram, never together. One examiner's report on a Higher paper, about a cube on a spring, called it a very challenging question. Many candidates gave weight or gravity as the downwards force and air resistance or drag as the upward force. The report goes on. Other candidates did not attempt to draw a free body diagram and instead just added the support to the top of the spring and the cube to the bottom of the spring without indicating the forces involved. The fix is the deletion and the agent check. Throw the picture away, then keep only the arrows that can name the object exerting them.
Now something moving. A sledge is pulled along level snow at a steady speed, by a rope held horizontally. Two questions first, then the arrows, then an agent for every one of them. Pause it there and draw the sledge's free body diagram, every arrow with its agent. Four arrows. The weight, from the Earth, down. The normal contact force, from the snow, up. The tension, from the rope, forwards. Friction, from the snow, backwards. On this kind of diagram, arrow lengths carry the comparison. Which pairs of arrows must be the same length, and why? Up matches down, and forwards matches backwards. At a steady speed in a straight line the forces are balanced, so the resultant is zero. Why steady motion goes with balanced forces is Newton's First Law, in the next chapter. Here you read the balance off the arrows, and write it underneath in words: balanced, resultant zero.
Here is a student's diagram of a book resting on a table. It shows the book's weight and the table's push on the book, and labels the two an interaction pair. That label is marked wrong, with a cross through it. What is wrong with calling those two forces an interaction pair? Both forces act on the book. A real pair is the same two objects swapped round, so its forces always sit on two different diagrams. Redraw it with a box for the book and a box for the table. The table's push on the book stays in the book's box. Its partner, the book's push on the table, goes in the table's box. And the weight pairs with the pull of the book on the Earth, which needs a third box, for the Earth. That gives a checking routine for every diagram. Does each arrow name its agent? And is any arrow's partner sitting on the same diagram?
One last pair of diagrams, for a skydiver. At the start of the fall, the weight arrow is long and the air resistance arrow is tiny, because the skydiver is barely moving through the air yet. Now jump ahead to later in the fall, when the speed has stopped changing. How do the two arrows compare at that point? Equal lengths. Weight down and air resistance up are balanced, and the resultant is zero. How the fall gets from the first picture to the second belongs to the video on terminal velocity. Here, the two pictures are enough. One examiner's report on a Higher paper records that the majority of candidates gained at least one mark. The question related to the free body diagram; candidates were expected to compare forces due to air resistance and weight. Comparing two arrows on a diagram is reading it. Producing the diagram from a real situation is what this video has practised.
To finish, three diagrams in your head, on objects you have not drawn yet. A lamp hangs from a ceiling cord. Which arrows go on the lamp's diagram? Two arrows of equal length: the weight from the Earth, down, and the pull of the cord, up. Now something sliding. You push a box across a floor at steady speed. How many arrows? Four. The weight down and the floor's push up, plus your push forwards and friction backwards, matched in pairs. Now: what is wrong if a ball's diagram shows its weight and its pull on the Earth? The ball's pull on the Earth acts on the Earth. It belongs on the Earth's diagram, not the ball's. And the cable car comes down to one box: its weight pulling down, the pull of its hanging arm pulling up, two arrows the same length.
Once this one's done for you, tap the thumbs-up icon, so you never have to sit through it twice. If the diagrams still feel slippery, save it, and draw one diagram yourself from scratch, because doing it once makes it stick.
Next in the chapter: Resolving forces with a scale vector diagram.
For more, visit scholafly.com, or watch the next video.
Related terms
For: AQA GCSE 8463, Edexcel GCSE 1PH0, OCR GCSE J249
On the specification
| Board | Spec | Statement |
|---|---|---|
| AQA GCSE 8463 | 4.5.1.4b | Resultant forces |
| Edexcel GCSE 1PH0 | 9.4 | Draw and use free body force diagrams |
| Edexcel GCSE 1PH0 | 9.5 | Explain examples of the forces acting on an isolated solid object or a system where several forces lead to a resultant force on an object and the special case of balanced forces when the resultant force is zero |
| OCR GCSE J249 | P2.2f | Describe examples of the forces acting on an isolated solid object or system |
| OCR GCSE J249 | P2.2g | Describe, using free body diagrams, examples where two or more forces lead to a resultant force on an object |
| OCR GCSE J249 | P2.2h | Describe, using free body diagrams, examples of the special case where forces balance to produce a resultant force of zero (qualitative only) |
For teachers
This GCSE Physics lesson teaches free body diagrams (Higher). By the end, students should be able to draw a free body diagram showing every force acting on one isolated object, and read off it whether those forces are balanced. It works through three worked examples and the mistakes examiners report.