MA07-06 Maths Watch
Limits of accuracy: upper and lower bounds
In this lesson
In this video you'll learn about limits of accuracy: upper and lower bounds for GCSE Maths, with worked examples and the mistakes examiners report. By the end you'll be able to given a rounded or truncated measurement, calculate the bound needed to answer a specific real-world question, and draw a valid conclusion from it.
What it covers
- Identifying, from the wording of a real-world question, whether the upper or lower bound is the one that answers it
- Using the identified bound in a further calculation or comparison
- Writing a conclusion that engages with the context (e.g. 'so it is/is not enough')
Key words
About this video
Limits of accuracy: upper and lower bounds | GCSE Maths
How to use limits of accuracy (upper and lower bounds) to answer a real-world question, with worked examples and the mistakes to avoid.
AQA, Edexcel, OCR and Eduqas GCSE, Foundation. Rounding and Bounds 6 of 6.
Full Rounding and Bounds playlist: https://www.youtube.com/playlist?list=PLNJQIOwSwq1Q
More at https://scholafly.com
Watch first: Error intervals from rounding and truncation - https://youtu.be/Y_JyRUCBqlU
Video code: MA07-06 (search "ScholaFly MA07-06")
Videos in this chapter:
MA07-01 Rounding to significant figures and decimal places: https://youtu.be/LH4ADEvdjDQ
MA07-02 Estimating a calculation by rounding: https://youtu.be/z6oVMnLGAx8
MA07-03 Upper and lower bounds of a rounded value: https://youtu.be/Z_hGVDMufZw
MA07-04 Bounds of a calculated result (Higher): https://youtu.be/MImTZify7ww
MA07-05 Error intervals from rounding and truncation: https://youtu.be/Y_JyRUCBqlU
MA07-06 Limits of accuracy: upper and lower bounds: https://youtu.be/hOTMB1WoWGs
#GCSEMaths #RoundingAndBounds
For teachers
This GCSE Maths lesson teaches limits of accuracy: upper and lower bounds. By the end, students should be able to given a rounded or truncated measurement, calculate the bound needed to answer a specific real-world question, and draw a valid conclusion from it. It works through two worked examples and the mistakes examiners report, and suits Foundation tier students.
Exam board specification references:
AQA 8300
- N16 Apply and interpret limits of accuracy
Edexcel 1MA1
- N16 Apply and interpret limits of accuracy
Eduqas C300
- FN16 Apply and interpret limits of accuracy
- HN16 Apply and interpret limits of accuracy, including upper and lower bounds
OCR J560
- 4.01c E.g. If x = 2.1 rounded to 1 dp, then 2.05 ≤ x < 2.15; e.g. If x = 2.1 truncated to 1 dp, then 2.1 ≤ x < 2.2
Read the transcript
A shelf is cut to ninety centimetres, correct to the nearest centimetre. It has to slot into a gap exactly ninety point four centimetres wide. Ninety is less than ninety point four, so it looks as if it fits. It might not. The answer turns on one bound, and choosing that bound comes before any calculation.
This is video six of six in Rounding, Estimation and Bounds. Here the bounds are assumed, so if working them out is rusty, Upper and lower bounds of a rounded value rebuilds that first.
You already know how to find both bounds. What these questions test is the decision before that: which bound is the worst case for what is being asked. A worst case is the true value that would make the answer go wrong. For the shelf, the question is whether it will definitely fit the gap. For will it definitely fit, is the worst case the shelf's upper or lower bound? The upper bound. The danger is a shelf that is too long, so the worst case is the longest it could really be. Now find that bound from the rounding. Nearest centimetre means half a centimetre either side. Ninety add nought point five is ninety point five centimetres. Next, compare it with the gap. Ninety point five is bigger than ninety point four, so a shelf near its upper bound would be too long. Then the conclusion, as a sentence. The shelf will not definitely fit, because it could be as long as ninety point five centimetres, and the gap is only ninety point four. One examiner's report on a Higher paper lists the slips on one bounds question. Common errors and misconceptions included: finding eleven point three four and comparing to, or subtracting from, twelve to give nought point six six left over, with no consideration of the lower bound. Those students compared a number with the target without asking which bound the question needed. The fix is to name the worst case, biggest or smallest, before any number is used.
Now the worst case points the other way. A bag of flour is labelled two kilograms, correct to the nearest hundred grams. A recipe needs at least one point nine five kilograms. The question is whether there is definitely enough. Decide, calculate, conclude: all three, in that order. Pause it there and work it out for yourself. The worry is too little flour, so the worst case is the least the bag could hold. That is its lower bound. Nearest hundred grams means fifty grams either side. Two kilograms is two thousand grams. Take away fifty, and that leaves one thousand nine hundred and fifty grams, which is one point nine five kilograms. The recipe needs at least one point nine five kilograms, and the lower bound is exactly that. At least includes equal to, so even the worst case is enough. There is definitely enough flour, only just, because the least the bag could hold is one point nine five kilograms, which meets the recipe. The same report lists a second slip, using an incorrect lower bound, for example eleven point four nine. Written down without its working, a bound is easy to get wrong. The habit that prevents it is writing the half-unit step out every time, the way the flour's fifty grams was.
To finish, the decision to name first, then two real questions that need it. In a real-world bounds question, what gets decided before any calculation? The worst case for the question asked, the biggest or the smallest the true value could be. Next: a lift carries up to five hundred kilograms, and no more. A crate weighs four hundred and ninety kilograms, to the nearest ten. Definitely safe? Yes. The danger is weight, so the worst case is the heaviest, four hundred and ninety-five kilograms. That is under five hundred, so it is definitely safe. Here's a different one: a rope is eight metres long, to the nearest metre. Does the rope definitely reach seven point six metres? No. The worry is a short rope, so the worst case is the lower bound, seven point five metres, which falls short. And the shelf from the start does not definitely fit the ninety point four centimetre gap, because its upper bound is ninety point five.
That completes Rounding, Estimation and Bounds. If picking the worst case now comes first for you, every time, thumbs-up this video, because you nailed it. Across the chapter, the videos with a thumb are done, and any without one are your revisit list. Save those to a playlist and come back to them later in the week.
Next comes a new chapter, Applied Number: Time, Money and the Calculator, starting with Using a calculator efficiently.
For more, visit scholafly.com, or watch the next video.
Related terms
For: AQA GCSE 8300, Edexcel GCSE 1MA1, Eduqas GCSE C300, OCR GCSE J560
On the specification
| Board | Spec | Statement |
|---|---|---|
| AQA GCSE 8300 | N16 | Apply and interpret limits of accuracy |
| Edexcel GCSE 1MA1 | N16 | Apply and interpret limits of accuracy |
| Eduqas GCSE C300 | FN16 | Apply and interpret limits of accuracy |
| Eduqas GCSE C300 | HN16 | Apply and interpret limits of accuracy, including upper and lower bounds |
| OCR GCSE J560 | 4.01c | E.g. If x = 2.1 rounded to 1 dp, then 2.05 ≤ x < 2.15; e.g. If x = 2.1 truncated to 1 dp, then 2.1 ≤ x < 2.2 |
For teachers
This GCSE Maths lesson teaches limits of accuracy: upper and lower bounds. By the end, students should be able to given a rounded or truncated measurement, calculate the bound needed to answer a specific real-world question, and draw a valid conclusion from it. It works through two worked examples and the mistakes examiners report, and suits Foundation tier students.