ScholaFly

MA07-05 Maths Watch

Error intervals from rounding and truncation

Watch on YouTube

In this lesson

In this video you'll learn about error intervals from rounding and truncation for GCSE Maths, with worked examples and the mistakes examiners report. By the end you'll be able to write the error interval of a value rounded or truncated to a stated accuracy as a double inequality, using the correct strict (<) and non-strict (≤) symbols.

By the end: Write the error interval of a value rounded or truncated to a stated accuracy as a double inequality, using the correct strict (<) and non-strict (≤) symbols.

What it covers

  • Writing lower ≤ x < upper for a value rounded to a stated accuracy
  • Choosing which inequality symbol is strict (<) and which is non-strict (≤), and explaining why
  • Writing the (different, non-symmetric) error interval for a truncated value

Key words

About this video

Error intervals from rounding and truncation | GCSE Maths

How to write the error interval of a value rounded or truncated to a stated accuracy, with worked examples and the mistakes examiners report.
AQA, Edexcel, OCR and Eduqas GCSE, Foundation. Rounding and Bounds 5 of 6.
Full Rounding and Bounds playlist: https://www.youtube.com/playlist?list=PLNJQIOwSwq1Q
More at https://scholafly.com

Watch first: Rounding to significant figures and decimal places - https://youtu.be/LH4ADEvdjDQ
Video code: MA07-05 (search "ScholaFly MA07-05")

Videos in this chapter:
MA07-01 Rounding to significant figures and decimal places: https://youtu.be/LH4ADEvdjDQ
MA07-02 Estimating a calculation by rounding: https://youtu.be/z6oVMnLGAx8
MA07-03 Upper and lower bounds of a rounded value: https://youtu.be/Z_hGVDMufZw
MA07-04 Bounds of a calculated result (Higher): https://youtu.be/MImTZify7ww
MA07-05 Error intervals from rounding and truncation: https://youtu.be/Y_JyRUCBqlU
MA07-06 Limits of accuracy: upper and lower bounds: https://youtu.be/hOTMB1WoWGs

#GCSEMaths #RoundingAndBounds

For teachers
This GCSE Maths lesson teaches error intervals from rounding and truncation. By the end, students should be able to write the error interval of a value rounded or truncated to a stated accuracy as a double inequality, using the correct strict (<) and non-strict (≤) symbols. It works through two worked examples and the mistakes examiners report, and suits Foundation tier students.

Exam board specification references:
AQA 8300
- N15 Note: including appropriate rounding for questions set in context
Edexcel 1MA1
- N15 Use inequality notation to specify simple error intervals due to truncation or rounding
Eduqas C300
- FN15 Round numbers and measures to an appropriate degree of accuracy (e.g. to a specified number of decimal places or significant figures); use inequality notation to specify simple error intervals due to truncation or rounding
- HN15 Round numbers and measures to an appropriate degree of accuracy (e.g. to a specified number of decimal places or significant figures); use inequality notation to specify simple error intervals due to truncation or rounding
OCR J560
- 4.01c E.g. If x = 2.1 rounded to 1 dp, then 2.05 ≤ x < 2.15; e.g. If x = 2.1 truncated to 1 dp, then 2.1 ≤ x < 2.2

Read the transcript

A plank is measured as forty-five centimetres, to the nearest centimetre. Its true length lies between two edges, forty-four point five and forty-five point five centimetres. One of those two edges could be the plank's real length. The other one never can be. An error interval shows which, with one small difference between two signs.

This is video five of six in Rounding, Estimation and Bounds. The two edges themselves come from Upper and lower bounds of a rounded value, the place to go if finding them feels shaky.

An error interval is every value a rounded number could have come from, written as one double inequality. A double inequality has the unknown in the middle, with a sign on each side of it. Two signs do the work. Less than or equal to, the sign with a bar underneath, includes the number beside it. Less than, with no bar, stops just short of the number beside it. The lower bound goes on the left, the letter in the middle, and the upper bound on the right. Call the plank's length L. That leaves one choice: which sign goes on which side. Here are three ways to write it. In A, the left sign is less than and the right sign is less than or equal to. In B, it is the other way round. In C, both signs are less than or equal to. Which one, A, B or C, is the error interval for the plank? B. The bottom edge rounds up to forty-five, so it belongs and takes the sign with the bar. The top edge rounds up and out, to forty-six, so it takes the strict sign. Read B aloud. Forty-four point five is less than or equal to L, which is less than forty-five point five. A length of forty-five point four nine nine still rounds to forty-five, so it sits inside. Forty-five point five rounds to forty-six. The interval runs right up to that edge, and stops just short of it. That gives a rule to check every time. The value that would round up and out of the interval gets the strict less-than sign. For a rounded value, that is always the upper bound. One examiner's report on a Higher paper gives the warning in a single line. When using an error interval, the upper bound must be chosen carefully. The habit that settles it is to round your upper bound in your head. If it rounds out of the interval, it gets the strict sign.

Truncation needs a different interval. A stopwatch truncates a runner's time to one decimal place, cutting digits off and never rounding, and it shows eight point three seconds. A true time of eight point three nine would also show as eight point three, because the nine is cut off. Eight point four would show as eight point four. Write the error interval for eight point three seconds, truncated, using t. Eight point three is less than or equal to t, which is less than eight point four. The reading itself is included, and the next reading up is the edge it never reaches. Now set it beside the rounded version. Rounded to one decimal place, eight point three would give eight point two five up to eight point three five, centred on the reading. Truncated, the whole interval sits at or above it. One examiner's report on a Higher paper closes with advice about this case. Based on their performance on this paper, candidates are offered the following advice: ensure you know how to write down an error interval when a number has been truncated. The fix starts with one word in the question. Rounded means centred on the value. Truncated means starting at the value, with the strict sign on the reading after it.

Three last questions, each one an interval to write or a sign to place. Which end of a rounding error interval gets the strict less-than sign? The upper bound, because that value would round up and out of the interval. Here's one with no decimals: six hundred grams, to the nearest hundred. Its interval? With m for the mass, five hundred and fifty is less than or equal to m, which is less than six hundred and fifty grams. That is fifty either side. Now a truncated one to finish, from a shop till that never rounds. A till cuts to whole pounds and shows twelve pounds. What is the error interval? Twelve is less than or equal to p, which is less than thirteen. The reading is included, and thirteen is the edge. And the plank from the start: forty-four point five could be its real length, and forty-five point five never can, which is why only the upper edge gets the strict sign.

When both signs land the right way round without a second thought, hit the thumbs-up for this lesson. On your list, a thumb here means this one's yours. If the signs still trip you, save it for later and leave it un-thumbed. Say the rule out loud once and it sticks: the edge that rounds out gets the strict sign.

Next in the chapter is Limits of accuracy: upper and lower bounds, where a real question picks which bound matters.

For more, visit scholafly.com, or watch the next video.

Related terms

For: AQA GCSE 8300, Edexcel GCSE 1MA1, Eduqas GCSE C300, OCR GCSE J560

On the specification

BoardSpecStatement
AQA GCSE 8300N15Note: including appropriate rounding for questions set in context; Note: Students should know not to round values during intermediate steps of a calculation
Edexcel GCSE 1MA1N15E.g. to a specified number of decimal places or significant figures; use inequality notation to specify simple error intervals due to truncation or rounding
Eduqas GCSE C300FN15Round numbers and measures to an appropriate degree of accuracy (e.g. to a specified number of decimal places or significant figures); use inequality notation to specify simple error intervals due to truncation or rounding
Eduqas GCSE C300HN15Round numbers and measures to an appropriate degree of accuracy (e.g. to a specified number of decimal places or significant figures); use inequality notation to specify simple error intervals due to truncation or rounding
OCR GCSE J5604.01cE.g. If x = 2.1 rounded to 1 dp, then 2.05 ≤ x < 2.15; e.g. If x = 2.1 truncated to 1 dp, then 2.1 ≤ x < 2.2
For teachers

This GCSE Maths lesson teaches error intervals from rounding and truncation. By the end, students should be able to write the error interval of a value rounded or truncated to a stated accuracy as a double inequality, using the correct strict (<) and non-strict (≤) symbols. It works through two worked examples and the mistakes examiners report, and suits Foundation tier students.