DT10-03 Design and Technology Watch
One-point and two-point perspective
In this lesson
One-point and two-point perspective: how to draw a product in one-point and two-point perspective. AQA 8552, Cambridge 0445 and Edexcel 1DT0 GCSE. Technical drawing 3 of 6. More at https://scholafly.com
By the end: Draw a product in one-point and two-point perspective - edges running away from you converge to vanishing points on a horizon line, verticals stay vertical - build rounded features inside a perspective box, and tell a perspective drawing from an isometric one at a glance.
What it covers
- 0:00 Intro: one-point and two-point perspective
- 0:43 What perspective
- 2:25 Two-point: the speaker
- 5:02 One-point: the microwave
- 8:16 Perspective or isometric?
Key words
About this video
One-point and two-point perspective | GCSE Design & Tech | DT10-03
One-point and two-point perspective: how to draw a product in one-point and two-point perspective.
AQA 8552, Cambridge 0445 and Edexcel 1DT0 GCSE. Technical drawing 3 of 6.
More at https://scholafly.com
Watch first: DT10-01 - https://youtu.be/kmx8p92g5ZQ
Video code: DT10-03 (search "ScholaFly DT10-03")
#GCSEDesignTech #TechnicalDrawing
For teachers
This GCSE Design & Tech lesson teaches one-point and two-point perspective. By the end, students should be able to draw a product in one-point and two-point perspective - edges running away from you converge to vanishing points on a horizon line, verticals stay vertical - build rounded features inside a perspective box, and tell a perspective drawing from an isometric one at a glance. It works through three worked examples and the mistakes examiners report.
Exam board specification references:
AQA 8552
- 3.3.5
Edexcel 1DT0
- 1.17.1
Cambridge 0445-2027
- 5 > Estimated one-point and two-point perspective > b1
Cambridge 0445-2028
- 3.2.1/b2
Read the transcript
Why do the top edges of a box seem to lean towards each other when you hold it by its corner? Hold a games-console box at arm's length, corner towards you, and look along it. The top edges you know are parallel lean together. Photograph it and extend those edges with a ruler. They meet, far off to the left and far off to the right. A drawing that keeps those edges parallel looks stiff. So why does a drawing that bends the truth look more real? Drawings copy those two far-off meeting points on purpose.
Perspective drawing shows an object the way your eye sees it, and it rests on one fact: the further away something is, the smaller it looks. That is why parallel edges running away from you seem to close together. They close until they meet at a point called the vanishing point. Every vanishing point sits on the horizon line, which is a line drawn at your eye level. Railway tracks are the everyday case. The rails never touch, yet they seem to meet at one point on the horizon. Vertical edges stay vertical in perspective. Only the edges running away from you head to a vanishing point. Now picture the horizon line drawn up high, over a box. Predict it: do you see the box's top face, or its underside? Its top. Your eye level is up there, so you are looking down on the box. Drop the eye level beneath it and the underside shows instead. There are two kinds to know. In one-point perspective, you look at the object face-on. Its front face is drawn true shape, and every edge going away from you runs to a single vanishing point. In two-point perspective, you look at the object corner-on. There are two vanishing points on the horizon, one on each side and far apart, and every horizontal edge runs to one or the other.
Two-point perspective first, on a Bluetooth speaker. It is a box a hundred and sixty millimetres wide, sixty deep and eighty tall, with a round grille fifty millimetres across on its front face. Step one: draw the horizon line above where the speaker will sit, so you look down on it. Mark a vanishing point near each end of that line, far apart. Step two: draw the nearest vertical edge, the front right corner, at a height that looks like eighty millimetres. Step three: from the top and the bottom of that edge, draw faint lines to both vanishing points. Step four. Front goes left, side goes right: which lines get the long cut? The left-hand lines get the long cut, for the hundred and sixty millimetre front. The right-hand lines get the short cut, for the sixty millimetre side. Both lengths are judged by eye. Step five: stand a vertical edge up at each cut. Step six finds the back corner of the top. From the top of each new edge, draw a line to the opposite vanishing point, and where those two lines cross is the corner. Now the reason. Why does each line go to the opposite vanishing point? Because each one is parallel to the near top edge facing it across the top, and that edge already runs to the same vanishing point. Parallel edges always share a vanishing point. Step seven is the grille. A round feature is crated first, which means boxed. Draw a perspective square fifty millimetres across on the front face, its top and bottom running to the left vanishing point and its sides vertical. Then sketch an ellipse touching the middle of each side. Step eight: rub out the construction lines and firm up the outline. Then check that every horizontal edge heads to a vanishing point and every vertical stays vertical. The vanishing points go far apart, near the edges of the paper, for a reason. Put them close together and the speaker stretches into a sharp wedge that no real box looks like.
One-point perspective suits a product seen face-on, like a microwave oven. Its front face is drawn true shape, four hundred and eighty millimetres wide and two hundred and eighty tall, with a door window on the left and a control panel on the right. A vanishing point is marked up and to the right. Step one is a faint line from each front corner whose edge you will see going back. With the vanishing point up and to the right, which corners are they? Top left, top right and bottom right. You look from above and to the right, so the top and the right side show, and the bottom left stays out of sight. Step two: choose the depth by eye and keep it short, because depth shrinks as it recedes. The back edges are drawn parallel to the front ones, horizontals horizontal and verticals vertical, between those faint lines. Step three is a rounded start button standing out from the control panel. It is built in three moves. First, draw the button's front face as a rectangle, true shape, because in one-point the front is not in perspective. Second, round its four corners. Third, the button needs depth. Which way do its short depth lines run? Back towards the vanishing point, from each visible corner. A matching rounded edge joins their ends, and that edge is where the button meets the panel, so the button stands proud. One examiner's report on a one-point question with a rounded button says the biggest challenge was the button's correct shape and giving it 3D qualities. The three moves deal with those one at a time: the rectangle, then the rounded corners for the shape, then the depth towards the vanishing point for the 3D look. Now a new kind of question. A row of identical ribs runs along the top of the microwave, from the front towards the back. Going back, do the ribs A, stay the same, B, spread out, or C, get thinner and closer? It is C. Further away looks smaller, so each rib gets thinner and each gap gets shorter as the row heads to the vanishing point. One examiner's report on a perspective question records that many students drew added parts the same distance apart and thickness as the given ones, rather than shortening them towards the vanishing point. The fix is to run faint lines from the first rib's corners to the vanishing point first. Then each step back is drawn a little smaller than the one before it.
Perspective and isometric can look alike at a glance, so the last skill is telling them apart. Here are two pictures of the speaker. In A, the top lines slope up at thirty degrees, all running the same way. In B, they lean in and meet at two spots on a line. The question asked for the two-point kind. Which drawing answers it, A or B, and why? Drawing B. Extend the edges that run away from you. In perspective they converge, which means they close in towards a point, and B's do. Drawing A's stay parallel, so it is isometric, however neat it is. One examiner's report on a two-point perspective question says that in the vast majority of cases, students could produce a 3D sketch of the product. The same report records that some confused other drawing methods, such as isometric, with perspective, and so could not reach full marks. So check the method the question names before you draw a line. Perspective means edges that converge, and isometric means edges that stay parallel.
Test yourself on perspective now, answering each one before I do.
Where does every vanishing point sit? Every vanishing point sits on the horizon line, drawn at eye level.
Now a product this video never drew. A table lamp is drawn with the horizon line below its base. Which part of the lamp's base will you see? The underside of the lamp's base, because the eye level is low, so you are looking up at it.
Now one-point. A fridge is drawn face-on. What shape is its front face? A true-shape rectangle. In one-point perspective the front face is not in perspective; only the edges going back run to the vanishing point.
Now a why. Why do repeated ribs get thinner and closer further back? Because further away looks smaller, for the gaps as well as the ribs.
Now the last check. Receding edges that stay parallel: perspective or isometric? Isometric. In perspective, receding edges converge towards a vanishing point.
Back to the games-console box. Its parallel edges lean together because further away looks smaller. A drawing that bends those edges to vanishing points looks real for the same reason your eye does it.
If you could build the speaker in two-point from those steps, give this a thumbs up, because that's in the bag. If that felt fast, that's normal, so save it and come back to it.
Next in the chapter is Third angle orthographic projection: views, hidden detail and centre lines. Hopefully that's next in your feed, but if not, search for ScholaFly D T one oh, oh four.
Every other video is on scholafly.com too, easy to search by video code or by keyword. Whatever you're revising, go there and have a look, or, watch the next video.
Related terms
For: AQA GCSE 8552, Edexcel GCSE 1DT0, Cambridge GCSE 0445
On the specification
| Board | Spec | Statement |
|---|---|---|
| AQA GCSE 8552 | 3.3.5 | {'ref': None, 'text': 'freehand sketching, isometric and perspective'}; {'ref': None, 'text': '2D and 3D drawings'}; {'ref': None, 'text': 'system and schematic diagrams'}; {'ref': None, 'text': 'annotated drawings that explain detailed development or the conceptual stages of designing'}; {'ref': None, 'text': 'exploded diagrams to show constructional detail or assembly'}; {'ref': None, 'text': 'working drawings: 3rd angle orthographic, using conventions, dimensions and drawn to scale'}; {'ref': None, 'text': 'audio and visual recordings in support of aspects of designing: eg interviews with client or users'}; {'ref': None, 'text': 'mathematical modelling'}; {'ref': None, 'text': 'computer based tools'}; {'ref': None, 'text': 'modelling: working directly with materials and components, eg card modelling, producing a toile when designing garments, constructing a circuit using breadboard.'} |
| Edexcel GCSE 1DT0 | 1.17.1 | {'ref': '1.17.1a', 'text': 'freehand sketching (2D and/or 3D)'}; {'ref': '1.17.1b', 'text': 'annotated sketches'}; {'ref': '1.17.1c', 'text': 'cut and paste techniques'}; {'ref': '1.17.1d', 'text': 'digital photography/media'}; {'ref': '1.17.1e', 'text': '3D models'}; {'ref': '1.17.1f', 'text': 'isometric and oblique projection'}; {'ref': '1.17.1g', 'text': 'perspective drawing'}; {'ref': '1.17.1h', 'text': 'orthographic and exploded views'}; {'ref': '1.17.1i', 'text': 'assembly drawings'}; {'ref': '1.17.1j', 'text': 'system and schematic diagrams'}; {'ref': '1.17.1k', 'text': 'computer-aided design (CAD) and other specialist computer drawing programs.'} |
| Cambridge GCSE 0445 | missing | the plan names no spec point for this board |
For teachers
This GCSE Design & Tech lesson teaches one-point and two-point perspective. By the end, students should be able to draw a product in one-point and two-point perspective - edges running away from you converge to vanishing points on a horizon line, verticals stay vertical - build rounded features inside a perspective box, and tell a perspective drawing from an isometric one at a glance. It works through three worked examples and the mistakes examiners report.