ScholaFly

PH08-07 Physics Watch

Gas particles, temperature and pressure

Watch on YouTube

In this lesson

Gas particles, temperature and pressure for GCSE Physics, with worked examples and the mistakes examiners report. AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Particles and matter 7 of 10. More at https://scholafly.com

By the end: Explain, using particle collisions with the container walls, why heating a gas in a sealed rigid container raises its pressure.

What it covers

  1. 0:00 Intro: gas particles: pressure
  2. 0:37 Moving gas particles
  3. 1:18 Where pressure comes
  4. 2:30 Heating a sealed gas
  5. 4:48 Sealed can: to . Why does the [pressure]
  6. 5:42 Put the links in [order]
  7. 6:35 What is wrong with collisions [
  8. 7:19 Tyres after a drive
  9. 8:23 Check the chain
  10. 9:38 Gas particles: pressure: the can on the dashboard

Key words

About this video

Gas particles, temperature and pressure | GCSE Physics | PH08-07

Gas particles, temperature and pressure for GCSE Physics, with worked examples and the mistakes examiners report.
AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Particles and matter 7 of 10.
More at https://scholafly.com

Watch first: PH08-01 - https://youtu.be/ignl5CWsYNM
Video code: PH08-07 (search "ScholaFly PH08-07")

#GCSEPhysics #ParticlesAndMatter #GasParticlesPressure

For teachers
This GCSE Physics lesson teaches gas particles, temperature and pressure. By the end, students should be able to explain, using particle collisions with the container walls, why heating a gas in a sealed rigid container raises its pressure. It works through four worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.

Exam board specification references:
AQA 8463
- 4.3.3.1
Edexcel 1PH0
- 14.12
- 14.13
OCR J249
- P1.3a
- P1.3b

Read the transcript

Turn an aerosol can over and read the small print. Why does a sealed can warn you to keep it below fifty degrees Celsius? Nothing gets into a sealed can, nothing gets out, and its metal does not change size. The tempting answer is that the gas inside expands. It can't, because the can is rigid, and yet a can left on a car dashboard on a hot day can still burst. That can on the dashboard makes sense once we follow the particles to its walls.

A gas is made of particles in constant random motion, moving in every direction at a whole range of speeds. The temperature of a gas goes with the average kinetic energy of its particles, so a hotter gas has faster particles on average. One examiner's report, on a Higher paper, says most students knew that a temperature rise gives the gas molecules more kinetic energy and a higher average speed. So that first link is already safe for most people, and the time here goes on the links that come after it.

Gas pressure comes from the particles hitting the walls of their container. Each particle that reaches a wall bounces off it, and as it bounces it pushes on the wall. A huge number of those hits every second add up to a steady force on the wall. Pressure is the force on each unit of area of the wall, such as each square centimetre. Inside the gas, particles also bounce off each other all the time. Do those collisions between particles push on the container? No. Two particles that collide push on each other, not on the container, so only hits on the walls make pressure. A report on a different Higher paper says many students seem to think that pressure is caused by particles colliding amongst themselves. The habit that fixes it is to name the walls in every sentence you write about gas pressure.

Now heat a gas in a sealed, rigid container, so neither its volume nor its number of particles can change. Link one: the temperature rises, so the particles' average kinetic energy rises, and they move faster. Link two is about what happens at the walls. A prediction: do faster particles hit the walls more often, harder, or both? Both. They reach the walls more frequently, with more collisions every second, and each collision is harder. Frequently is the word that matters, because it means more hits every second, which is a rate. The report that found most students knew the first link adds that they were expected to say the molecules collided more frequently with the walls, and frequently was often left out. The fix is to say more frequently, with the walls named, every time, and never more collisions on its own. Link three: more frequent, harder hits mean a bigger total force on each unit of area of the wall. Link four: force on each unit of area is pressure, so the pressure is higher. The report that found students blaming collisions between particles adds that only a minority reached a greater force on the walls, and those then failed to link it to the definition of pressure. The habit is to finish the chain out loud, with force on each unit of area is pressure as its last link. In a rigid can the gas cannot expand, and the particles do not grow. Only their speed changes. Cooling runs the chain backwards. The particles slow down, hit the walls less frequently and less hard, the force on each unit of area falls, and the pressure falls.

Back to the aerosol can, which warms from twenty degrees Celsius to forty-five on a dashboard. Your job is to explain, link by link, why the pressure inside it rises. Pause it there and write the chain for yourself. The temperature rises, so the particles' average kinetic energy rises, and they move faster. Faster particles hit the walls of the can more frequently and harder, so the force on each unit of area of the wall is bigger. Force on each unit of area is pressure, so the pressure is higher. The can is rigid and sealed, so its volume and its number of particles have not changed.

Now the chain runs backwards. A steel gas cylinder goes from a warm workshop into a freezing yard overnight, and its gauge reading falls with no leak. Four links are muddled up. A, the force on each unit of area falls. B, the particles slow down. C, they hit the walls less frequently. D, the gauge reading falls. What is the right order for those four links? The order runs B, then C, then A, and D last. Slower particles hit the walls less frequently, so the force on each unit of area falls, so the pressure falls.

A student writes that when the gas is heated, the particles collide with each other more, so the pressure goes up. What is wrong with blaming the pressure on particles colliding with each other? Particles hitting each other do not push on the container. Pressure comes from collisions with the walls. A version that scores says the particles move faster, so they collide with the walls more frequently and with more force, so the force on each unit of area rises, so the pressure rises.

Last, a driver checks the tyre pressures before a long motorway drive and again straight after it. The second reading is higher, though no air was added. The chain is the one the can used, already written: warmer air, faster particles, more frequent and harder hits on the inside of the tyre, more force on each unit of area, higher pressure. Now the part that is new. A tyre is not rigid, so why may the can's chain still be used? Because the tyre barely changes size, so its volume is very nearly constant, which is the condition the chain needs. That is also why tyre makers ask for a cold reading. It compares like with like, showing how much air is in the tyre rather than how warm it happens to be.

Finally, check the chain holds, one question at a time. First, what causes the pressure of a gas? Gas pressure comes from particles hitting the walls of the container, each hit pushing on the wall. Now a new object. A corked bottle of air is warmed. What happens to the force on the cork? The force on the cork increases, because faster particles hit it more frequently and harder. Now the key word. Which word must describe the extra collisions? Frequently, which means more collisions with the walls every second. Now the definition at the end of the chain. What is pressure? Pressure is the force on each unit of area.

And the aerosol can with its warning, left on the dashboard. Its particles speed up in the heat and hit the walls more frequently and harder, so the pressure climbs with nothing added at all.

If you can say all four links, walls and frequently included, and run them backwards, give this a thumbs-up, because this one's yours. If not, leave it un-thumbed and come back, because a chain like this gets easier each time it meets a new object.

Next in the chapter is Absolute zero and the kelvin scale. Hopefully that's next in your feed, but if not, search for ScholaFly P H oh eight, oh eight.

Every other video is on scholafly.com too, easy to search by video code or by keyword. Whatever you're revising, go there and have a look, or, watch the next video.

Related terms

For: AQA GCSE 8463, Edexcel GCSE 1PH0, OCR GCSE J249

On the specification

BoardSpecStatement
AQA GCSE 84634.3.3.1Particle motion in gases
Edexcel GCSE 1PH014.12Explain the pressure of a gas in terms of the motion of its particles
Edexcel GCSE 1PH014.13Explain the effect of changing the temperature of a gas on the velocity of its particles and hence on the pressure produced by a fixed mass of gas at constant volume (qualitative only)
OCR GCSE J249P1.3aExplain how the motion of the molecules in a gas is related both to its temperature and its pressure application to closed systems only
OCR GCSE J249P1.3bExplain the relationship between the temperature of a gas and its pressure at constant volume (qualitative only)
For teachers

This GCSE Physics lesson teaches gas particles, temperature and pressure. By the end, students should be able to explain, using particle collisions with the container walls, why heating a gas in a sealed rigid container raises its pressure. It works through four worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.