PH03-09 Physics Watch
Levers and gears (triple)
In this lesson
Levers and gears (triple) for GCSE Physics. AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Forces 9 of 9. Full Forces playlist: {{playlist:PH03-09}} More at https://scholafly.com
By the end: Explain how a lever or a gear multiplies the turning effect of a force, using the moment equation on both sides of the pivot.
What it covers
- 0:00 Intro: levers and gears (triple)
- 3:26 Levers and gears (triple): a pivot at one end
- 5:01 Gears
- 7:51 Levers and gears (triple): the trade
Key words
About this video
Levers and gears (triple) | GCSE Physics | PH03-09
Levers and gears (triple) for GCSE Physics.
AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Forces 9 of 9.
Full Forces playlist: {{playlist:PH03-09}}
More at https://scholafly.com
Watch first: PH03-08 Moments and the principle of moments (triple)
Video code: PH03-09 (search "ScholaFly PH03-09")
Videos in this chapter:
PH03-00 Forces and their effects - Intro: {{link:PH03-00}}
PH03-01 Contact and non-contact forces: {{link:PH03-01}}
PH03-02 Weight, mass and gravitational field strength: {{link:PH03-02}}
PH03-03 Resultant forces: {{link:PH03-03}}
PH03-04 Free body diagrams (Higher): {{link:PH03-04}}
PH03-05 Resolving forces with a scale vector diagram (Higher): {{link:PH03-05}}
PH03-06 Elastic and inelastic deformation: {{link:PH03-06}}
PH03-07 Hooke's law and the spring constant: {{link:PH03-07}}
PH03-08 Moments and the principle of moments (triple): {{link:PH03-08}}
PH03-09 Levers and gears (triple): {{link:PH03-09}}
#GCSEPhysics #Forces #LeversAndGearsTriple
For teachers
This GCSE Physics lesson teaches levers and gears (triple). By the end, students should be able to explain how a lever or a gear multiplies the turning effect of a force, using the moment equation on both sides of the pivot. It works through four worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.
Exam board specification references:
AQA GCSE Physics (8463)
- 4.5.4 Moments, levers and gears
Pearson Edexcel Level 1/Level 2 GCSE (9-1) in Physics (1PH0)
- 9.6P Describe situations where forces can cause rotation
- 9.7P Recall and use the equation: moment of a force (newton metre, N m) = force (newton, N) × distance normal to the direction of the force (metre, m)
- 9.8P Recall and use the principle of moments in situations where rotational forces are in equilibrium: the sum of clockwise moments = the sum of anti-clockwise moments for rotational forces in equilibrium
- 9.9P Explain how levers and gears transmit the rotational effects of forces
OCR GCSE (9-1) Gateway Science Suite - Physics A (J249)
- P2.3k Describe examples in which forces cause rotation
- P2.3l Define and calculate the moment of a force
- P2.3m Explain how levers and gears transmit the rotational effects of forces
- PM2.3vi Recall and apply: moment of a force (N m) = force (N) × distance (m) (normal to direction of the force)
Read the transcript
Bolt croppers with half-metre handles snip through a steel padlock shackle you could not even bend by hand. So where did the extra force come from? Nobody got stronger, and it is tempting to think the croppers give out more energy than you put in. No tool makes energy from nothing. They made a trade, not a gift, and the trade runs on the moment equation. We will settle where the croppers' extra force came from once the trade is in view.
One line of recap: the moment equation says a moment is force times perpendicular distance from the pivot, and a balanced object has equal moments each way. A lever is a rigid bar that turns about a pivot. The force you put in is the effort, and the force it works against is the load. The pivot can sit between effort and load, as in a seesaw, a crowbar or scissors. The load can sit in the middle, as in a wheelbarrow or a bottle opener. Or the effort can sit in the middle, as in your forearm. Here is why a long handle helps. For the same moment, a bigger distance needs a smaller force, because moment is force times distance. A crowbar is ninety centimetres long and rests on a pivot fifteen centimetres from the load end. The load is nine hundred newtons. Both distances are measured from the same pivot, one on each side of it. How far is the effort, at the far end, from the pivot? Seventy-five centimetres, from ninety take away fifteen. Converted, the load arm is nought point one five metres and the effort arm is nought point seven five metres. The load's moment is nine hundred newtons times nought point one five metres, which is one hundred and thirty-five newton metres. For balance, the effort's moment must match it. Effort times nought point seven five equals one hundred and thirty-five, so the effort is one hundred and thirty-five divided by nought point seven five. One division finishes it, and the answer comes out in newtons. What effort force is needed at the far end? One hundred and eighty newtons, to shift a load of nine hundred. The longer arm on the effort side turned a fifth of the force into the same moment. One examiner's report on a Higher separate physics paper describes the most popular approach: to consider the distance between the effort force on the end of the handle and the pivot point. A good discussion would include the equation moment equals force times perpendicular distance. So the habit is to name the pivot, measure both distances from it, and write the equation before any number.
Now a lever with its pivot at one end. A wheelbarrow carries four hundred and fifty newtons of soil, whose weight acts forty centimetres from the wheel's axle. The handles are gripped one hundred and thirty centimetres from the axle. The axle is the pivot. Both distances are measured from it, even though the load and the effort sit on the same side, which is the one way a wheelbarrow differs from a seesaw. The soil's moment is four hundred and fifty newtons times nought point four metres, which is one hundred and eighty newton metres. The handles must supply that same moment, from the longer distance. What lifting force is needed at the handles? One hundred and eighty divided by one point three is about one hundred and thirty-eight newtons. Far less than the soil's four hundred and fifty. Now the soil is shovelled ten centimetres closer to the wheel, so its distance from the axle drops to thirty centimetres. Without substituting again, what happens to the lifting force? It falls to three quarters of its value, about one hundred and four newtons, because the soil's distance is now three quarters of what it was.
Now gears. A gear is a wheel with teeth, and two gears mesh when their teeth lock together. When one turns, its teeth push on the other gear's teeth. Zoom in on the one pair of teeth that touch. Gear A pushes on gear B there, and gear B pushes back on gear A: an interaction pair, doing a job. Each gear is a lever whose arm is its radius. The force at the teeth, times that gear's radius, is the moment about its own centre. Gear A has twelve teeth and drives gear B, which has thirty-six. With teeth the same size, three times the teeth means three times the radius. Gear A turns clockwise. Which way does gear B turn? Anticlockwise. Meshing gears always turn in opposite directions. Now, does gear B turn faster or slower than gear A? Slower. Every tooth of A passes one tooth of B, so A turns three times for each single turn of B. Now the third verdict, the one that needs the radius. Is the turning effect at B bigger or smaller than at A? Bigger. The force at the teeth is the same on both, but gear B's radius is three times as long, so its moment is three times as big. A small gear driving a big one turns the turning effect up and the rate down. A big gear driving a small one does the reverse. One examiner's report on a Foundation paper, about two gears, says that of those that scored marks, most got the first mark point for stating the gears moved in opposite directions, with the minority discussing the different speeds. Very few achieved the second mark point. The same report adds what earned that second mark: for those who did, it was for stating gear A exerts a force on gear B. It also notes that some mentioned momentum instead of moment, thereby causing confusion in the response. The fix is three slots on every gear answer, direction, speed and turning effect, and two words in it: force, and moment. Moment turns things. Momentum is about moving, a different quantity altogether.
Back to the bolt croppers. A student writes: the bolt croppers multiply my force, so I get more energy out than I put in. That sentence is marked wrong, with a cross beside it. Extra energy is ruled out. So what do the croppers trade to get the extra force? The force goes up, but the energy does not. The handles move a long way while the jaws move only a little: more force, less distance. Every lever and gear makes that trade. Keep the units apart too: a moment turns something and is in newton metres, while work done moves something and is in joules. The energy side is worked out in the video on work done and energy transfer.
Three last questions, on machines this video never showed. A spanner handle is made twice as long. What happens to the force for the same moment? It halves. Twice the distance needs half the force to give the same moment. Now a gear pair: a big one drives a small one. Which turns faster, and which turns harder? The small gear spins faster. The big gear has the bigger turning effect, because its radius is longer. Another gear question: what actually turns the driven gear? The force of the driving gear's teeth on the driven gear's teeth, acting at its radius to make a moment about its centre. And that is where the bolt croppers' extra force came from: long handles, short jaws. The hands moved a long way and the jaws only a little, so the force went up while the energy did not. Nobody got stronger.
This video closes the forces chapter. Nailed it? Then that thumbs up is your note to yourself that it is done. If levers and gears still feel loose, save it, and come back to it later in the week.
That completes Forces and their effects. Next chapter: Newton's laws and motion.
For more, visit scholafly.com, or watch the next video.
Related terms
For: AQA GCSE 8463, Edexcel GCSE 1PH0, OCR GCSE J249
On the specification
| Board | Spec | Statement |
|---|---|---|
| AQA GCSE 8463 | 4.5.4 | Moments, levers and gears |
| Edexcel GCSE 1PH0 | 9.6P | Describe situations where forces can cause rotation |
| Edexcel GCSE 1PH0 | 9.7P | Recall and use the equation: moment of a force (newton metre, N m) = force (newton, N) × distance normal to the direction of the force (metre, m) |
| Edexcel GCSE 1PH0 | 9.8P | Recall and use the principle of moments in situations where rotational forces are in equilibrium: the sum of clockwise moments = the sum of anti-clockwise moments for rotational forces in equilibrium |
| Edexcel GCSE 1PH0 | 9.9P | Explain how levers and gears transmit the rotational effects of forces |
| OCR GCSE J249 | P2.3k | Describe examples in which forces cause rotation |
| OCR GCSE J249 | P2.3l | Define and calculate the moment of a force |
| OCR GCSE J249 | P2.3m | Explain how levers and gears transmit the rotational effects of forces |
| OCR GCSE J249 | PM2.3vi | Recall and apply: moment of a force (N m) = force (N) × distance (m) (normal to direction of the force) |
For teachers
This GCSE Physics lesson teaches levers and gears (triple). By the end, students should be able to explain how a lever or a gear multiplies the turning effect of a force, using the moment equation on both sides of the pivot. It works through four worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.