ScholaFly

CS07-06 Computer Science Watch

The hardware that builds a network

Watch on YouTube

In this lesson

Network hardware: how to name the five pieces of hardware needed to turn stand-alone computers into a LAN. OCR J277 GCSE. Networks 6 of 8. Full Networks playlist: https://www.youtube.com/playlist?list=PLGjXtmcKnz7o More at https://scholafly.com

By the end: Name the five pieces of hardware needed to turn stand-alone computers into a LAN - NIC, switch, router, wireless access point and transmission media - and state the specific tasks each one performs, distinguishing a switch from a hub and a switch from a server.

What it covers

  1. 0:00 Intro: network hardware
  2. 0:38 Network hardware: task or purpose
  3. 1:16 Inside each computer
  4. 2:41 Network hardware: the switch
  5. 5:20 Network hardware: the router
  6. 7:00 Network hardware: the box on the shelf

Key words

About this video

Network Hardware: what builds a network | GCSE Computer Science | CS07-06

Network hardware: how to name the five pieces of hardware needed to turn stand-alone computers into a LAN.
OCR J277 GCSE. Networks 6 of 8.
Full Networks playlist: https://www.youtube.com/playlist?list=PLGjXtmcKnz7o
More at https://scholafly.com

Video code: CS07-06 (search "ScholaFly CS07-06")

#GCSEComputerScience #Networks #NetworkHardware

For teachers
This GCSE Computer Science lesson teaches the hardware that builds a network. By the end, students should be able to name the five pieces of hardware needed to turn stand-alone computers into a LAN - NIC, switch, router, wireless access point and transmission media - and state the specific tasks each one performs, distinguishing a switch from a hub and a switch from a server. It works through four worked examples and the mistakes examiners report.

Exam board specification references:
OCR J277
- 1.3.1

Read the transcript

Five computers, a printer and two laptops sit in one room, each on its own, and they want the Internet too. How many kinds of hardware does it take to join them all up? One box, a router, is the usual guess. It takes more than that, and the router, the famous one, does the least of them inside the room. Its job starts where the room ends. By the recap, you will know why the famous router does the least.

For each piece of hardware, a task is something it does to the data: it receives the data, reads an address, or sends the data on. A purpose says why the box exists, such as providing a connection. It is not a task, because it says nothing about what happens to the data. One of the three courses lists this hardware by name. The router and the switch turn up in the other courses' questions too, so the next few minutes are useful to anyone.

Inside each computer is a network interface controller, or NIC, sometimes called a network interface card. The NIC is the hardware that lets a device connect to a network, by cable or wirelessly. It turns the device's data into signals, and turns incoming signals back into data. Each NIC holds a MAC address, an identifier for that one device. How a MAC address is written is in IP addresses and MAC addresses, in the next chapter. The signals need something to travel through. Transmission media are the cables or radio waves that carry the data: copper cable, fibre optic cable, or wireless. Wired and wireless compares them. Now a smart TV joins the home Wi-Fi. Which piece inside the TV makes that possible? Its NIC, a wireless one. Any device that joins a network needs one, whether it connects by cable or by radio.

Every cable in the room runs to a switch. A switch connects the devices on a LAN to each other. When data arrives, the switch reads its destination MAC address and sends it only to the device it is meant for. It knows where that device is because it keeps a table of which MAC address sits on which of its ports, the sockets the cables plug into. An older box, the hub, reads no addresses. It sends a copy of everything to every device, and each device ignores what is not for it. And a switch is not a server. It stores no files and provides no services; data passes through it and leaves. Three descriptions of what a switch does with data. One: it stores the data for the devices. Two: it sends the data to every device. Three: it reads the destination MAC address and sends the data to that device only. Which of the three describes a switch? The third. The first describes a server's job, and the second is what a hub does. One examiner's report describes how the stronger answers explained it. Some of the stronger responses identified how the switch records the MAC addresses of devices connected to it and used these to identify which device the data needed to be transmitted to. The same report names two slips, and the first is about servers. A common misconception was that a switch performed the same role as a server, with candidates incorrectly identifying that the switch stored the data for devices in the network and that the switch provided services to the connected devices. The second slip is about hubs. Some candidates confused a switch with a hub and identified that the data was sent to all devices connected to it. The fix for both: a switch reads the address, sends the data to one device, and keeps nothing.

The router sits where the room ends. It connects one network to another, here the LAN to the Internet. It receives packets, small pieces of data that each carry a destination address. It reads each packet's destination IP address, the number that identifies a device across networks, and sends the packet on towards that destination. In a home, the router also gives each device on the LAN its own IP address. A student is asked for a task of a router and writes: it provides an internet connection. What is wrong with 'it provides an internet connection' as a task? It is a purpose, why the router exists. A task says what it does to the data, such as reading a packet's destination IP address. On router tasks, one line from an examiner's report sets out the right kind of answer. The most common correct responses were that the router receives packets from devices and that it sends packets to devices. Both of those are verbs acting on packets. That is the habit for every piece: a verb, and what it does to the data.

The fifth piece is the wireless access point. It lets wireless devices join a wired network, by sending and receiving radio signals. A home has one box on the shelf, and the label on it says router. Which of the five pieces are inside that one box on the shelf? Usually three: a router, a small switch with a few sockets, and a wireless access point. There is often a modem too, which converts signals for the broadband line. So the Wi-Fi in a home comes from the access point inside that box, not from the router part of it. Back to the room from the start: five computers, a printer and two laptops, and they want the Internet too. Which pieces does that LAN need, and what is one task for each? A NIC in every device, turning its data into signals. Cables from the wired machines to a switch, which sends each piece of data only to the device it is meant for. A wireless access point lets the two laptops join by radio. And a router sends packets out to the Internet and passes the replies back in.

Right, a quick round of four questions, ending on why that famous router does so little inside the room. What does a switch do with data it receives? It reads the destination MAC address and sends the data only to that device. Now two laptops arrive with no cable port. Which piece lets them join the network? A wireless access point. Each laptop's wireless NIC talks to it by radio, and it passes the data onto the wired network. Here's another: which piece connects the LAN to the Internet, a NIC or the router? The router. A NIC connects one device to the network; the router connects the network to other networks. One more: why does the router do the least inside the room? Its tasks face outward. It forwards packets to and from the Internet, while inside the room the switch does the delivering. So the room needed five kinds of hardware, not one box.

Five pieces, each with its task: if that is done and dusted for you, mark it with a thumbs-up and move on. If it is not there yet, keep it in your saved videos and give it a day. Five names and five verbs settle better after a night's sleep.

Next in the chapter: Client-server and peer-to-peer, the jobs the computers themselves take on. Hopefully that's next in your feed, but if not, search for ScholaFly C S oh seven, oh seven.

Every other video is on scholafly.com too, easy to search by video code or by keyword. Whatever you're revising, go there and have a look, or, watch the next video.

Related terms

For: OCR GCSE J277

On the specification

BoardSpecStatement
OCR GCSE J2771.3.1Networks and topologies
For teachers

This GCSE Computer Science lesson teaches the hardware that builds a network. By the end, students should be able to name the five pieces of hardware needed to turn stand-alone computers into a LAN - NIC, switch, router, wireless access point and transmission media - and state the specific tasks each one performs, distinguishing a switch from a hub and a switch from a server. It works through four worked examples and the mistakes examiners report.