ScholaFly

CS07-05 Computer Science Watch

Network topologies

Watch on YouTube

In this lesson

How to draw and describe star, bus and mesh topologies, with worked examples and the mistakes examiners report. AQA 8525, Edexcel 1CP2 and OCR J277 GCSE. Networks 5 of 8. Full Networks playlist: https://www.youtube.com/playlist?list=PLGjXtmcKnz7o More at https://scholafly.com

By the end: Draw and describe star, bus and mesh topologies, give the advantages and disadvantages of each - above all what happens when one part fails - state a difference between two topologies as a matched pair, and choose the most suitable topology for a given scenario, knowing which of the three your own board asks for.

What it covers

  1. 0:00 Intro: network topologies
  2. 0:41 Network topologies: what a topology
  3. 1:29 Network topologies: the star
  4. 3:47 Network topologies: the bus
  5. 5:18 Network topologies: the mesh
  6. 6:56 Comparing two shapes
  7. 8:36 Choosing a topology

Key words

About this video

Network topologies | GCSE Computer Science | CS07-05

How to draw and describe star, bus and mesh topologies, with worked examples and the mistakes examiners report.
AQA 8525, Edexcel 1CP2 and OCR J277 GCSE. Networks 5 of 8.
Full Networks playlist: https://www.youtube.com/playlist?list=PLGjXtmcKnz7o
More at https://scholafly.com

Video code: CS07-05 (search "ScholaFly CS07-05")

#GCSEComputerScience #Networks #NetworkTopologies

For teachers
This GCSE Computer Science lesson teaches network topologies. By the end, students should be able to draw and describe star, bus and mesh topologies, give the advantages and disadvantages of each - above all what happens when one part fails - state a difference between two topologies as a matched pair, and choose the most suitable topology for a given scenario, knowing which of the three your own board asks for. It works through four worked examples and the mistakes examiners report.

Exam board specification references:
AQA 8525
- 3.5
Edexcel 1CP2
- 4.1.8
OCR J277
- 1.3.1

Read the transcript

Six computers are joined up in three different shapes. Cut one cable in each: which shape keeps every computer working? It is tempting to think a cut cable always stops something. In one shape one computer goes dark, in another all six can, and in the third nothing stops. Finding out which shape is which starts with what a shape means for a network. First, what a shape means; then the six computers get their answers.

A topology is the physical layout of a network: which devices are connected to which, and by what links. It is a shape, not a size. A topology answer is about how the devices are joined, never about how large an area the network covers. The courses ask for different shapes, and one course's newer version drops topologies altogether. Check which shapes your course lists, and which version you sit; each course's list sits alongside. A fourth shape, the ring, is on none of the three courses, so it is left out here.

In a star, every device connects to one central device, usually a switch: a box that passes data between the devices plugged into it. That central device is not a server. A server is a computer that provides services to others; the centre of a star passes data along and stores nothing. Now cut the cable to one computer in the star. What stops working? Only that one. Each of the others keeps its own separate link, so it carries on. The weak point is the middle. If the switch fails, every device connected to it loses the network. A star is quick to grow, with one more cable to the centre for each new device. But it needs more cable than a bus, which costs more. Draw a star network for five computers and two printers, and label every device. Try it on paper before I show you the answer. One switch in the middle, labelled. Seven lines, one from the switch to each computer and each printer, and no line between any two of them. Count them out loud: seven devices, seven lines. One extra line between two computers would start turning the star into a mesh. One examiner's report, on a star network question, records a slip about the middle. A few candidates referred to the star network as having a server. The fix: draw and describe one central device, a switch, and never add a server or a second router in the middle.

In a bus, every device connects to one shared main cable, called the backbone, with a terminator at each end to stop signals bouncing back. A bus is cheap, because it uses little cable. But every device sees all the traffic on the backbone, so data can collide, and the network slows as more devices join. One computer on the bus breaks down. Do the others keep working? They keep working. The broken one hangs off a short link of its own, and the main cable is untouched, so messages still pass between the rest. Cut the backbone itself, and every device stops, because they all share that one cable. A bus question drew this line from an examiner's report. One common incorrect answer for question thirteen point three was to say that if one computer in the bus network failed then the whole network would fail. The fix is to name the backbone cable. If the backbone fails, every device stops; if one computer fails, the rest carry on.

In a mesh, every device connects to several others. In a full mesh, every device connects to every other one, and a mesh can be wired or wireless. Why does cutting one link in a mesh not stop the data? There is another route. The data travels through other devices to reach its destination, so there is no single point of failure. A single point of failure is one part whose failure stops everything else, like the switch at the centre of a star. The drawback is the number of connections. Every extra link is more cable or hardware, so a mesh is expensive and awkward to set up. A report on a later paper separates the shape from the software. A mesh network is the connections between devices in a network, it is not how the software for the network operates for example as a client-server network. What went wrong there is mixing two ideas. Topology is about cables and links; how computers share out jobs is a different idea, in the video Client-server and peer-to-peer.

A difference between two topologies takes the whereas shape from the video LAN, WAN and PAN: one fact for each side. For example: if one computer's cable is cut in a star, only that computer is affected, whereas if the backbone of a bus is cut, every device stops. Three answers to the task, give a difference between a star and a mesh. One: a star has a switch. Two: a mesh has no single point of failure, whereas a star stops if its switch fails. Three: a mesh is expensive, whereas a star is easy to draw. Which of the three is a two-sided difference between star and mesh? Answer two. It gives a fact about one topology, then the matching fact about the other. Three has a whereas, but its two halves are about different things. A general comment in an examiner's report sets the rule. Questions that ask for differences to be described, or require a similar comparison, should be answered with a response that gives both points. The habit that follows: before you finish a difference, check it has a fact for each topology.

The youth centre from the video LAN, WAN and PAN, with twelve computers in one building, is choosing between a star and a mesh. Name a benefit of a mesh, and a drawback, then pick a topology for the centre. Benefit: no single point of failure, because data can take another route. Drawback: each device needs many connections, so cabling costs far more. For twelve computers in one building, a star is the sensible pick. It is cheaper to cable, and only its switch is a single point of failure.

Let's run back through it with four questions, ending on which shape survived the cut. In a star, what happens when the central switch fails? Every device connected to it loses the network. Now a new one: a full mesh joins four devices. How many links does it need? Six. Each of the four joins the other three, which gives twelve link ends, and every link has two ends. A different one: a mesh has no single point of failure, whereas a star does what? Whereas a star stops working everywhere if its central switch fails. One more: of the opening three, which shape kept going when a cable was cut, and why? The mesh. The data took another route around the cut, so no device lost its connection.

If you've cracked all three shapes and what breaks in each, leave a thumbs-up on this one, and you will never need to sit through it twice. If the shapes are still blurry, save it and draw all three again tomorrow. The drawings get quicker every time you do them.

Next in the chapter: The hardware that builds a network, including what that central switch does with the data. Hopefully that's next in your feed, but if not, search for ScholaFly C S oh seven, oh six.

Every other video is on scholafly.com too, easy to search by video code or by keyword. Whatever you're revising, go there and have a look, or, watch the next video.

Related terms

For: AQA GCSE 8525, Edexcel GCSE 1CP2, OCR GCSE J277

On the specification

BoardSpecStatement
AQA GCSE 85253.5Computer networks
Edexcel GCSE 1CP24.1.8Describe the characteristics of bus, star and mesh network topologies.
OCR GCSE J2771.3.1Networks and topologies
For teachers

This GCSE Computer Science lesson teaches network topologies. By the end, students should be able to draw and describe star, bus and mesh topologies, give the advantages and disadvantages of each - above all what happens when one part fails - state a difference between two topologies as a matched pair, and choose the most suitable topology for a given scenario, knowing which of the three your own board asks for. It works through four worked examples and the mistakes examiners report.