BI06-02 Biology Watch
What limits the rate of photosynthesis
In this lesson
Limiting factors: how to work out what is holding the rate of photosynthesis back when one factor at a time is changed. AQA 8461, Edexcel 1BI0 and OCR J247 GCSE. Plant energy 2 of 7. More at https://scholafly.com
By the end: Work out what is holding the rate of photosynthesis back when one factor at a time is changed, and calculate and read that rate off a graph.
What it covers
- 0:00 Intro: limiting factors: photosynthesis
- 0:44 Limiting factors: photosynthesis: measuring the rate
- 3:21 Limiting factors
- 7:41 Describe, then explain
- 9:30 A tomato greenhouse
- 11:10 Test what stuck
Key words
About this video
Limiting Factors: what limits the rate of photosynthesis | GCSE Biology | BI06-02
Limiting factors: how to work out what is holding the rate of photosynthesis back when one factor at a time is changed.
AQA 8461, Edexcel 1BI0 and OCR J247 GCSE. Plant energy 2 of 7.
More at https://scholafly.com
Video code: BI06-02 (search "ScholaFly BI06-02")
#GCSEBiology #PlantEnergy
For teachers
This GCSE Biology lesson teaches what limits the rate of photosynthesis. By the end, students should be able to work out what is holding the rate of photosynthesis back when one factor at a time is changed, and calculate and read that rate off a graph. It works through three worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.
Exam board specification references:
AQA 8461
- 4.4.1.2a
Edexcel 1BI0
- 6.3
OCR J247
- B1.4d
- B1.4e
- BM1.4i
- BM1.4ii
- BM1.4iii
- BM1.4iv
Read the transcript
If a plant needs light to make its food, why not give it as much light as you can? Some farms grow lettuce indoors, in racks under LED lights, with no sunlight at all. Picture turning those lights up a notch: the lettuce photosynthesises faster. Up another notch, and it goes faster again. One more notch, and nothing changes. The plants haven't stopped, and the light hasn't harmed them. More light has stopped helping. Why the extra light buys nothing starts with measuring how fast photosynthesis goes.
The rate of photosynthesis is how fast it happens: how much photosynthesis takes place in a set amount of time. This is for everyone, on both the Foundation and the Higher papers. You can't watch glucose being made, but you can watch a product leave. Pondweed under water gives off oxygen as bubbles, so more bubbles each minute means a faster rate. So a rate is an amount divided by the time it took. Rate equals amount over time, and if you counted bubbles for a number of minutes, the unit is bubbles per minute. A student counts the oxygen bubbles rising from a piece of pondweed. In four minutes she counts eighteen bubbles. What is the rate, with its unit? The amount is eighteen bubbles and the time is four minutes, so we divide eighteen by four. Eighteen divided by four is four and a half. So the rate is four and a half bubbles per minute. The unit is part of the answer. Four and a half on its own doesn't say what was counted, or for how long. Her first count, though, was twenty-two bubbles in the same four minutes. Which of her two counts is the real rate, and what should she do next? Neither count alone gives the real rate. She should repeat it several more times and use the mean, so one odd count can't decide the answer. With just these two, the mean is twenty-two plus eighteen, which is forty, divided by two. That is twenty bubbles in four minutes, or five bubbles per minute. One examiner's report on a Higher paper records that: Half of the students correctly calculated the rate of photosynthesis as three bubbles of gas per minute. Common errors included dividing the distance by the number of bubbles produced at that distance. The fix is to name your two numbers before you divide: the amount counted, over the time it took. The lamp's distance has no place in this sum.
Several things change that rate. A factor that is holding the rate back is called a limiting factor, and three factors can do it on every course: temperature, light intensity and carbon dioxide concentration. Light intensity means how bright the light is. Carbon dioxide concentration means how much carbon dioxide is in the air or water around the plant. And on some courses there is a fourth factor, the amount of chlorophyll, because less chlorophyll absorbs less of the light that arrives. To see what one factor does, you change that factor and keep everything else the same. The rate of photosynthesis goes up the side of the graph, and the factor you changed goes along the bottom. A plant is moved from a dim corner to a bright window. Which factor has changed? Light intensity. At the window, much more light falls on each leaf every second. Start with light intensity. At first, increasing the light intensity increases the rate, because more light means more energy transferred to the reaction each second. That is also why distance matters. The further the lamp is from a plant, the lower the light intensity, and the slower the rate. How you word that rising part matters as much as reading it. A student writes: light increases photosynthesis. Which two words is it missing? Intensity and rate. Increasing the light intensity increases the rate of photosynthesis. It is the rate that changes, and it is the light's intensity that changes it. One examiner's report on a Higher paper notes that a number of candidates just stated that light increases photosynthesis, rather than increasing light intensity, increases the rate of photosynthesis. The fix is that full sentence, every time. That sentence is also a conclusion, and a conclusion puts cause before effect. The factor you changed is the cause, and the rate is the effect. The same precision goes for anything you keep constant: keep the light intensity the same, never just the light. The report on the rate calculation has better news about conclusions: Almost three-quarters of students made a correct conclusion describing the effect of light intensity on the rate of photosynthesis. Cause and effect had to be the correct way around, to link back to what the investigation was set up to find out. Keep increasing the light intensity, though, and the line levels off. Three students explain that flat part differently. One says photosynthesis has stopped. One says the plant has had too much light. One says light intensity is no longer the limiting factor. Which of the three explains the flat part of the line correctly? The third. The plant is still photosynthesising on the flat part, just no faster, because something else is now holding the rate back. The earlier report, the one on wording, lists what went wrong on a flat part like this: common misconceptions being that photosynthesis stopped at this point, normally because the enzymes denatured, or that light intensity stopped increasing, or that this was when light became the limiting factor. Instead, give the flat part its own sentence: the plant is still photosynthesising, and light intensity is no longer the limiting factor.
A different factor now, on the same kind of graph: carbon dioxide concentration, with the temperature and the light intensity held constant. The line rises steeply from point A to point B, then flattens out from B to C. Questions on a graph like this use two different command words. Describe says what the line does. Explain says why the plant did it. Describe what happens to the rate of photosynthesis between A and B. Between A and B, as the carbon dioxide concentration increases, the rate of photosynthesis increases steeply. And the explanation for that rise: carbon dioxide is a reactant, so while it is in short supply, giving the plant more of it speeds the reaction up. That covers the rising part, so the flat part gets a sentence of its own. Now explain the flat part from B to C. What has changed by then? Carbon dioxide concentration is no longer the limiting factor. The plant is still photosynthesising, but extra carbon dioxide doesn't make it any faster, because something else is now holding the rate back. Each part of the graph got its own sentence, describe first and then explain. Answering one part at a time keeps the two from blurring into one general paragraph.
Temperature is the third factor, and its line behaves differently. A grower's greenhouse of tomato plants shows how. At fifteen degrees Celsius the plants photosynthesise slowly. He raises it to twenty-five degrees, and the rate goes up. He raises it to forty-five degrees, and the rate falls almost to nothing. Three results, so three separate explanations, each with its own reason. Explain all three temperature results, one sentence for each. At fifteen degrees, temperature is the limiting factor. The molecules have little energy, so they collide with the enzymes' active sites less often, and the reaction is slow. At twenty-five degrees, they move faster and collide more often, so the rate goes up. At forty-five degrees, the enzymes that control photosynthesis have denatured. Their active sites have changed shape and stopped working, so the rate falls. Why enzymes denature is the video on what changes the rate of an enzyme-controlled reaction. And measuring any of this at the bench, with a lamp and some pondweed, is its own required practical video. So the temperature line rises, peaks and falls. It's the only one of these factors whose line turns round.
Time to test what stuck. Say each answer before I do. Thirty bubbles in five minutes: what is the rate, with its unit? Thirty divided by five is six, so the rate is six bubbles per minute. Another: a rate graph levels off. Has photosynthesis stopped there? No. It is still going, but the factor on the axis is no longer the limiting factor. Now one on cold: why is the rate very slow at five degrees Celsius? Temperature is the limiting factor. The molecules have so little energy that they rarely collide with the enzymes' active sites. And the lettuce under the LED lights. Past that notch, light intensity was no longer the limiting factor, so more light bought nothing. Something else was holding the rate back.
All the chapter's videos so far are up, with this one last. If you're comfortable with it, a thumbs-up means you never have to sit through it twice. If not yet, keep the playlist saved; it gets easier with every graph you read.
Next in the chapter, for Higher: interacting limiting factors. On Foundation, go on to what a plant does with the glucose it makes. Hopefully that's next in your feed, but if not, search for ScholaFly B I oh six, oh three.
Every other video is on scholafly.com too, easy to search by video code or by keyword. Whatever you're revising, go there and have a look, or, watch the next video.
Related terms
For: AQA GCSE 8461, Edexcel GCSE 1BI0, OCR GCSE J247
On the specification
| Board | Spec | Statement |
|---|---|---|
| AQA GCSE 8461 | 4.4.1.2a | Rate of photosynthesis |
| Edexcel GCSE 1BI0 | 6.3 | Explain the effect of temperature, light intensity and carbon dioxide concentration as limiting factors on the rate of photosynthesis |
| OCR GCSE J247 | B1.4d | Describe experiments to investigate photosynthesis |
| OCR GCSE J247 | B1.4e | Explain the effect of temperature, light intensity and carbon dioxide concentration on the rate of photosynthesis |
| OCR GCSE J247 | BM1.4i | Understand and use simple compound measures such as the rate of a reaction |
| OCR GCSE J247 | BM1.4ii | Translate information between graphical and numerical form |
| OCR GCSE J247 | BM1.4iii | Plot and draw appropriate graphs, selecting appropriate scales and axes |
| OCR GCSE J247 | BM1.4iv | Extract and interpret information from graphs, charts and tables |
For teachers
This GCSE Biology lesson teaches what limits the rate of photosynthesis. By the end, students should be able to work out what is holding the rate of photosynthesis back when one factor at a time is changed, and calculate and read that rate off a graph. It works through three worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.