PH08-01 Physics Watch
The particle model and the states of matter
In this lesson
Particle model and the states of matter for GCSE Physics, with worked examples and the mistakes examiners report. AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Particles and matter 1 of 10. More at https://scholafly.com
By the end: Use particle diagrams of a solid, a liquid and a gas to explain why the same substance has a different density in each state.
What it covers
- 0:00 Intro: particle model and the states of matter
- 0:42 The particle model
- 3:30 Density in each state
- 6:02 Checking a particle drawing
- 11:09 Particle model and the states of matter: the mug of steam
Key words
About this video
Particle Model and the States of Matter | GCSE Physics | PH08-01
Particle model and the states of matter for GCSE Physics, with worked examples and the mistakes examiners report.
AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Particles and matter 1 of 10.
More at https://scholafly.com
Video code: PH08-01 (search "ScholaFly PH08-01")
#GCSEPhysics #ParticlesAndMatter
For teachers
This GCSE Physics lesson teaches the particle model and the states of matter. By the end, students should be able to use particle diagrams of a solid, a liquid and a gas to explain why the same substance has a different density in each state. It works through three worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.
Exam board specification references:
AQA 8463
- 4.3.1.1
Edexcel 1PH0
- 14.1
- 14.4
OCR J249
- P1.1e
Read the transcript
Boil a mug of water until the mug is dry. That quarter of a litre of water becomes roughly four hundred litres of steam, which is more than a full bath. Where did all that extra room come from, when nothing was added to the water? The tempting answer is that the water particles swell up as they get hot. They don't, and they don't get any lighter either. Every particle that left the mug was already in it, and every one of them is the same size it always was. Keep that mug of steam in mind until the particles are drawn.
Everything around you is made of particles, far too small to see, and this chapter runs on that one picture. In this model, a particle means one atom or one molecule of the substance. It never means the protons, neutrons or electrons inside an atom. We draw each particle as a small ball, and every ball of one substance is drawn the same size. Each state gets a box of its own, and all three boxes are the same size. The same substance can be a solid, a liquid or a gas, and those three are called the states of matter. Start with the solid. Its particles touch their neighbours, and they sit in fixed positions in a neat, regular pattern. They are not still, though. Each particle vibrates about its fixed spot, like someone fidgeting in a seat they cannot leave. Now the liquid. Its particles still touch, so they are about as close together as in the solid. But the regular pattern has gone, and the particles can slide past one another. That sliding is why a liquid flows and takes the shape of its container. Before the gas is described, make a prediction of your own. Are a gas's particles closer than the liquid's, about the same, or much further apart? Much further apart. In a gas the particles are spread out with big gaps between them, and they move quickly and randomly in every direction. A gas particle travels in a straight line until it collides with another particle or with the wall of its container. Look at the size of the balls in all three boxes. They match, because they are the same particles, and only the spacing and the movement have changed. Now a question about the gas box. What is in the gaps between those particles? Nothing at all. Between the particles of a gas there is empty space, not air and not vapour. Air is itself a gas made of particles, so it cannot be the filling between other particles. If the gaps in that steam were full of air, the mug would have needed four hundred litres of air hidden inside it.
Those three boxes explain why one substance has a different density in each state. Density is how much mass is packed into each bit of space. A lot of mass squeezed into a small space means a high density. Think of twelve people squeezed into a lift, and then the same twelve spread across a football pitch. The people have not changed, only the room they take up. Particles work the same way. Each one has its own mass, and that mass does not change from one state to another. Same particles, and the same number of them, means the same mass in every state. Now a reason. Same particles, same mass, so why is the gas so much less dense? Because the spacing changes. In the liquid the particles touch, but in the gas they are far apart, so the same mass is spread over a much bigger space. That is why a gas is far less dense than the same substance as a liquid, very roughly a thousand times less. The solid is usually a little denser than the liquid, because its regular pattern packs the particles slightly more tightly. Water breaks that pattern: ice floats on water, because ice is the less dense of the two. It is an exception, and knowing that it exists is all you need. Every time the three boxes are drawn, the explanation that goes with them is the same. Same particles, same mass, different spacing, and so a different density. One examiner's report, on a Foundation paper, gives both halves of the picture. The majority drew the three particle diagrams correctly. But few explained how the density differed between the three states, so complete answers were rare. The fix is to write one more sentence after every drawing. Say that the particles are further apart, so the same mass takes up more space, so the density is lower. If you can already draw the three boxes, you are where the majority of those students were, and the sentence finishes the job.
A particle drawing is judged on a few details, and they can be checked one at a time. Every particle is the same size in all three boxes. The solid sits in neat rows, and the gas is widely spaced. The liquid's particles touch, but with no pattern. Nothing at all is drawn between the particles. Three students each draw a liquid beside the same solid box. Which liquid drawing is right: A, with touching particles in no pattern, B, with the particles spaced out with gaps, or C, with touching particles drawn smaller than the solid's? A is right. A liquid's particles touch, they have no pattern, and they are the same size as the solid's. Now a different question. Why is drawing B wrong, when a liquid can flow? Because B has drawn a gas. A liquid flows because its particles slide past each other while still touching, and gaps belong to a gas. Drawing C has shrunk the particles, and particles never change size from one state to another. Now a real substance. A sealed bag holds three grams of nitrogen gas, taking up about two point six litres. The bag is cooled until all of the nitrogen is a liquid, which takes up less than four cubic centimetres. The mass is still three grams. Your job is to explain, using particles, why the liquid is so much denser than the gas. Pause it there and work out the explanation for yourself. The particles are the same, and so is their number, which means the mass stays at three grams in both states. In the gas the particles are far apart, with empty space between them. In the liquid they are touching. Two point six litres is about two thousand six hundred cubic centimetres. The same three grams goes from that much space into less than four cubic centimetres. More mass in each cubic centimetre means a higher density. The particles did not shrink, because the gaps closed. One last explanation to check. A student writes that steam is less dense than water because its particles are lighter and bigger. Is the mistake calling the steam particles lighter than water's, calling them bigger, or both? Both are wrong. Steam particles are the same water molecules as in the liquid, with the same mass, so they are not lighter. And particles do not swell when they are heated, so they are not bigger. The sentence that scores reads like this. Steam is less dense because its particles are much further apart, so the same mass takes up a much larger volume.
Time to pull it together, one question at a time. First, in a solid, how do the particles move? Solid particles vibrate about fixed positions, touching their neighbours in a regular pattern. Next question. What is between the particles of a gas? Empty space between the gas particles, with nothing in it at all, not even air. Now a new case. When a metal melts, does its density fall a little or a thousandfold, and why? By a little. Melted particles still touch, so the spacing hardly changes, and only boiling spreads them far apart. Now the last one. In your own words, why is a gas less dense than the same substance as a liquid? The particles and their mass are the same, but they are further apart, so the mass is spread over more space.
And that is the mug of steam. The extra room came from the same particles moving far apart, with nothing but empty space between them.
If you can draw the three boxes and say why their densities differ, give this a thumbs-up; that's in the bag, and you need never watch it again. If not, leave it un-thumbed and come back to it, and give it a day and look again.
Next in the chapter is Density. Hopefully that's next in your feed, but if not, search for ScholaFly P H oh eight, oh two.
Every other video is on scholafly.com too, easy to search by video code or by keyword. Whatever you're revising, go there and have a look, or, watch the next video.
Related terms
For: AQA GCSE 8463, Edexcel GCSE 1PH0, OCR GCSE J249
On the specification
| Board | Spec | Statement |
|---|---|---|
| AQA GCSE 8463 | 4.3.1.1 | Density of materials |
| Edexcel GCSE 1PH0 | 14.1 | Use a simple kinetic theory model to explain the different states of matter (solids, liquids and gases) in terms of the movement and arrangement of particles |
| Edexcel GCSE 1PH0 | 14.4 | Explain the differences in density between the different states of matter in terms of the arrangements of the atoms or molecules |
| OCR GCSE J249 | P1.1e | Explain the differences in density between the different states of matter in terms of the arrangements of the atoms and molecules |
For teachers
This GCSE Physics lesson teaches the particle model and the states of matter. By the end, students should be able to use particle diagrams of a solid, a liquid and a gas to explain why the same substance has a different density in each state. It works through three worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.