ScholaFly

PH07-08 Physics Watch

Estimating how stopping distance grows with speed

Watch on YouTube

In this lesson

Estimating how stopping distance grows for GCSE Physics, with worked examples and the mistakes examiners report. AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Stopping and momentum 8 of 8. More at https://scholafly.com

By the end: Use the work-done argument that braking distance grows with the square of the speed to estimate stopping distances across typical speeds.

What it covers

  1. 0:00 Intro: estimating how stopping distance grows
  2. 0:38 Estimating how stopping distance grows: two pieces of a stop
  3. 4:01 Estimating at a new speed
  4. 5:44 Reading speed graphs

Key words

About this video

Estimating how stopping distance grows with speed | GCSE Physics | PH07-08

Estimating how stopping distance grows for GCSE Physics, with worked examples and the mistakes examiners report.
AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Stopping and momentum 8 of 8.
More at https://scholafly.com

Watch first: PH05-03 - https://youtu.be/rmeZe50Imc4, PH07-02 - https://youtu.be/6E5CWSiDz-g
Video code: PH07-08 (search "ScholaFly PH07-08")

#GCSEPhysics #StoppingAndMomentum

For teachers
This GCSE Physics lesson teaches estimating how stopping distance grows with speed. By the end, students should be able to use the work-done argument that braking distance grows with the square of the speed to estimate stopping distances across typical speeds. It works through three worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.

Exam board specification references:
AQA 8463
- 4.5.6.3.1b
Edexcel 1PH0
- 2.32P
- 2.33P
OCR J249
- P8.1f
- P8.1i

Read the transcript

Why does three and a half times the speed give eight times the stopping distance? The Highway Code's chart says a car at twenty miles an hour needs twelve metres to stop. At seventy miles an hour it needs ninety-six metres. If the stop grew in step with the speed, seventy miles an hour would need forty-two metres. It needs more than twice that. That jump from twelve metres to ninety-six follows a rule, and this lesson shows you where it comes from.

Stopping distance is thinking distance plus braking distance. When the brakes are applied, they do work that removes the car's kinetic energy. This video is for separate physics students, at Foundation and at Higher alike. Thinking distance is speed times reaction time, so with the same driver it grows in proportion to the speed. Double the speed, and the thinking distance doubles. Braking distance grows faster than that, and a work-done calculation shows why. One board asks you to show this calculation in the exam, and the others need the result and how to use it. The calculation keeps two things fixed: the same mass, and the same braking force. A one thousand kilogram car brakes with a constant braking force of six thousand newtons, first from twelve metres per second. Kinetic energy is one half m v squared, so we square the speed first: twelve squared is one hundred and forty-four. One half times one thousand kilograms times one hundred and forty-four is seventy-two thousand joules. The brakes must do seventy-two thousand joules of work, and work is force times distance. So the braking distance is seventy-two thousand joules divided by six thousand newtons, which is twelve metres. Now the same car from twenty-four metres per second, twice the speed: using the same steps, what is its kinetic energy in joules, and then its braking distance? Twenty-four squared is five hundred and seventy-six, and one half times one thousand times five hundred and seventy-six is two hundred and eighty-eight thousand joules. Two hundred and eighty-eight thousand joules divided by six thousand newtons is forty-eight metres. Double the speed has given four times the braking distance. In symbols, the braking force times the braking distance equals one half m v squared. Rearranged, the braking distance is m v squared divided by two times the braking force. With m and the force fixed, the braking distance is proportional to v squared. Now three times the speed. Take your pick, and hold on to your reason before I show you. Does the braking distance go up three times, six times, or nine times? Nine times, because the braking distance follows the speed squared, and three squared is nine. The square belongs to the braking distance only. At three times the speed, the thinking distance is three times as long, not nine.

To estimate a stopping distance at a new speed from one known pair, scale the two pieces differently: the thinking piece by the speed ratio, and the braking piece by the speed ratio squared. The Highway Code gives thirty miles an hour as nine metres of thinking distance and fourteen metres of braking distance. Sixty miles an hour is two times thirty, so the speed ratio is two. The thinking piece scales by two: nine metres times two is eighteen metres. The braking piece scales by two squared, which is four: fourteen metres times four is fifty-six metres. Eighteen metres plus fifty-six metres gives seventy-four metres, and the Highway Code's own figure is seventy-three. Now pause and try seventy miles an hour: its speed ratio to thirty is seven thirds, about two point three three. Estimate the stopping distance. Thinking: nine metres times two point three three is about twenty-one metres. Braking: two point three three squared is about five point four four, and fourteen metres times five point four four is about seventy-six metres. Twenty-one metres plus seventy-six metres is about ninety-seven metres, within a metre of the chart's ninety-six.

On a graph of distance against speed, the thinking distance is a straight line through the origin, and the braking distance is a curve that gets steeper as the speed rises. To read a value, start from the quantity you are given on its own axis, go to the curve, then across to the other axis. A graph shows braking distance against speed for a car and for a loaded lorry, each braking with the same force. At twenty metres per second the car needs twenty-five metres and the lorry forty metres. At ten metres per second the car is at half the speed, so its braking distance is a quarter: twenty-five metres divided by four is about six metres. From its twenty-five metres at twenty metres per second, what is the car's braking distance at thirty metres per second? Thirty is one and a half times twenty, and one and a half squared is two point two five. Twenty-five metres times two point two five is about fifty-six metres. Now the lorry. Why does its curve sit above the car's at every speed? The lorry has more mass, so at the same speed it has more kinetic energy. With the same braking force, more work must be done to stop it, so it needs a longer braking distance at every speed. Weaker brakes do the same thing to a curve, because a smaller braking force needs a longer distance to do the same work. The curve also carries a safety point. For this car, going from thirty to thirty-five metres per second adds about twenty metres of braking, because the curve is steepest at high speed.

To round off, some questions, and try each one yourself first. With the same mass and braking force, how does braking distance depend on speed? Braking distance is proportional to the speed squared. Now both pieces at once. A car has ten metres of thinking distance and fifteen metres of braking distance: what is the stopping distance at three times the speed? Thinking scales by three, to thirty metres. Braking scales by nine, to one hundred and thirty-five metres. Together, that is one hundred and sixty-five metres. Now halve it. With half the speed and the same braking force, what happens to the braking distance? The braking distance falls to a quarter, because a half squared is a quarter. Now worn brakes. They give a smaller braking force: what happens to the braking-distance curve, and why? The curve moves higher at every speed, because a smaller force needs a longer distance to do the work that removes the same kinetic energy. And the chart from the start: from twenty to seventy miles an hour, the thinking piece grew three and a half times, from six metres to twenty-one. The braking piece grew by about three and a half squared, from six metres to seventy-five. Together, twelve metres became ninety-six, eight times as far.

That wraps up stopping distances and momentum. If there's no need to see this one twice, give it a thumbs up. If not, save it, because one estimate done on your own paper is what makes it stay.

The next chapter is Particles and matter. Hopefully that's next in your feed, but if not, search for ScholaFly P H oh eight, oh oh.

Every other video is on scholafly.com too, easy to search by video code or by keyword. Whatever you're revising, go there and have a look, or, watch the next video.

Related terms

For: AQA GCSE 8463, Edexcel GCSE 1PH0, OCR GCSE J249

On the specification

BoardSpecStatement
AQA GCSE 84634.5.6.3.1bStopping distance
Edexcel GCSE 1PH02.32PEstimate how the distance required for a road vehicle to stop in an emergency varies over a range of typical speeds
Edexcel GCSE 1PH02.33PCarry out calculations on work done to show the dependence of braking distance for a vehicle on initial velocity squared (work done to bring a vehicle to rest equals its initial kinetic energy)
OCR GCSE J249P8.1fEstimate how the distances required for road vehicles to stop in an emergency, varies over a range of typical speeds
OCR GCSE J249P8.1iEstimate, for everyday road transport, the speed, accelerations and forces involved in large accelerations
For teachers

This GCSE Physics lesson teaches estimating how stopping distance grows with speed. By the end, students should be able to use the work-done argument that braking distance grows with the square of the speed to estimate stopping distances across typical speeds. It works through three worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.