ScholaFly

PH07-03 Physics Watch

Braking, energy and large decelerations

Watch on YouTube

In this lesson

Braking distance for GCSE Physics, with worked examples and the mistakes examiners report. AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Stopping and momentum 3 of 8. More at https://scholafly.com

By the end: Explain braking as friction in the brakes doing work that moves the car's kinetic energy into the thermal store of the brakes.

What it covers

  1. 0:00 Intro: braking distance and energy
  2. 0:36 Where the energy goes
  3. 3:38 Braking distance and energy: a heavier van
  4. 6:59 Braking hard

Key words

About this video

Braking Distance: Braking, energy and large decelerations | GCSE Physics | PH07-03

Braking distance for GCSE Physics, with worked examples and the mistakes examiners report.
AQA 8463, Edexcel 1PH0 and OCR J249 GCSE. Stopping and momentum 3 of 8.
More at https://scholafly.com

Watch first: PH05-03 - https://youtu.be/rmeZe50Imc4, PH05-05 - https://youtu.be/l1mCb9-l0Ys, PH07-02 - https://youtu.be/6E5CWSiDz-g
Video code: PH07-03 (search "ScholaFly PH07-03")

#GCSEPhysics #StoppingAndMomentum #BrakingDistanceAndEnergy

For teachers
This GCSE Physics lesson teaches braking, energy and large decelerations. By the end, students should be able to explain braking as friction in the brakes doing work that moves the car's kinetic energy into the thermal store of the brakes. It works through three worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.

Exam board specification references:
AQA 8463
- 4.5.6.3.4a
Edexcel 1PH0
- 2.31
OCR J249
- P8.1e
- P8.1g

Read the transcript

How can a set of brakes stop working well because it has been doing its job? On long, steep mountain roads there are gravel escape lanes, built for lorries whose brakes have faded on the way down. Those brakes are not broken, and nobody forgot to service them. They stopped working well because they had been braking hard for too long. By the end, that lorry's glowing brakes and the gravel lane will make complete sense.

A moving car has energy in its kinetic energy store, and to stop, all of that energy has to be transferred somewhere else. Kinetic energy equals one half times mass times speed squared, in joules, and the video on kinetic energy covers it if it is new. When the driver brakes, a pair of brake pads squeezes against a metal disc that turns with the wheel, and as the car slows, that disc starts to glow. Which friction makes the brakes hot: the friction between the tyres and the road, or the friction between the brake pads and the disc? The friction between the brake pads and the disc. That is where two surfaces rub past each other as the car slows, and that is the part that heats up. That friction force does work on the car. Work done is force multiplied by distance, and the video on work done and energy transfer builds it if you need it. The work done by friction in the brakes reduces the kinetic energy store of the car. It increases the thermal store of the brakes, the energy they hold because of their temperature, so the brakes get hot. The hot brakes then transfer energy to the surroundings by heating. One examiner's report on a Higher paper notes many students incorrectly referred to friction between the wheels and the road. The fix is to put the friction in the brakes, between the pads and the disc, and to name the two stores it links. Now put numbers on it. A car of mass fifteen hundred kilograms is travelling at twenty metres per second, and it brakes to a stop. Kinetic energy equals one half times mass times speed squared, and we square the speed first. Twenty metres per second, squared, is four hundred metres squared per second squared. Then one half times fifteen hundred kilograms times four hundred gives three hundred thousand joules. Now the brakes' share. How much energy do they transfer to stop this car, and into which store? All of it, because the car ends with no kinetic energy at all, and it goes into the thermal store of the brakes. None of it is lost. The kinetic energy store goes down by three hundred thousand joules, and the thermal store of the brakes goes up by the same amount, before that energy spreads out into the air around them.

To stop a car, the brakes must do work equal to the kinetic energy it had, and that work is the braking force multiplied by the braking distance. An empty delivery van has a mass of two thousand kilograms. Loaded, it has a mass of three thousand kilograms. Both times it brakes from fifteen metres per second with the same braking force, and when it is empty it stops in thirty metres. For the empty van, fifteen squared is two hundred and twenty-five. One half times two thousand kilograms times two hundred and twenty-five gives two hundred and twenty-five thousand joules. The loaded van moves at the same speed, so only the mass in the equation changes. So what is the kinetic energy of the loaded van, three thousand kilograms at fifteen metres per second? One half times three thousand kilograms times two hundred and twenty-five gives three hundred and thirty-seven thousand five hundred joules. Divide the loaded van's energy by the empty van's energy, and the answer is one point five. The braking force is the same, so if the empty van stops in thirty metres, how far does the loaded van need? The distance grows by the same one point five, because the force is fixed and the work has grown one and a half times. Thirty metres times one point five is forty-five metres. One examiner's report on a Foundation paper looked at a question about a heavier bicycle. It says many students did not understand that more mass meant more kinetic energy, and so more work done to bring the cyclist to a stop. For the same braking force, the report adds, that means a larger braking distance. So write the chain in full: more mass, so more kinetic energy, so more work done to stop, so a longer braking distance with the same braking force. Turn it round, and to stop the heavier van in the same distance, the brakes need a larger braking force. Now a different one. Why does a faster car need a larger braking force to stop in the same distance? A faster car has more kinetic energy, so the brakes must do more work, and to do more work in the same distance they need a larger force. How much larger depends on the square of the speed, and that rule has a separate-physics video of its own later in this chapter. Deceleration is slowing down, how much the speed falls each second, in metres per second squared. For the same mass, a larger braking force gives a larger deceleration, because force equals mass times acceleration.

A larger braking force gives a larger deceleration, so the obvious instinct is to brake as hard as you can. Braking as hard as possible always gives the safest stop: right or wrong? It is wrong, because the harder the braking, the worse three separate dangers become. First, the brakes heat up faster than they can pass the energy on to the air, and overheated brakes give much less braking force. Second, the wheels can lock and skid, and a skidding car does not steer, so the driver loses control. Third, the people inside are thrown forward with very large forces, which can injure them. How seat belts and air bags make those forces smaller has its own video later in this chapter. Now the lorry. It drives down a long, steep hill, braking all the way to keep its speed steady. Try it on paper before I show you the answer: using energy stores, explain why the lorry's brakes may stop working well near the bottom of the hill. As it descends, its gravitational potential energy store decreases. The speed is steady, so the kinetic energy store does not grow, which means the energy is not going into speed. Instead, the work done by friction in the brakes transfers it into the thermal store of the brakes. Over a long hill the brakes get very hot, they overheat, and overheated brakes give much less braking force.

To finish, four questions, and every one of them is yours before it is mine. When a car brakes, which store empties, which store fills, and what does the transferring? The kinetic energy store of the car empties and the thermal store of the brakes fills, through work done by the friction between the brake pads and the disc. Now a new vehicle. A cyclist and bike, eighty kilograms in all, at five metres per second: how much energy do the brakes transfer? Five squared is twenty-five, and one half times eighty kilograms times twenty-five is one thousand joules. Now compare two cars. Same speed and braking force, but one has twice the mass: how do the braking distances compare? The heavier car has twice the kinetic energy, so with the same force it needs twice the braking distance. Now the last one. Can you name two dangers of a very large deceleration? Any two of these: the brakes overheat and lose braking force, the wheels lock and the car skids, or the people inside feel very large forces. And that lorry on the mountain was pouring a whole hill's worth of energy into its brakes, faster than they could pass it on to the air, so they overheated and faded. The gravel lane is there for that moment.

If you're solid on this, a thumbs up tells you this one is finished. If not, save it, and say the energy sentence out loud once, because it sticks once it has been said.

Next in the chapter is Estimating the forces in a road-vehicle deceleration, a Higher video. Hopefully that's next in your feed, but if not, search for ScholaFly P H oh seven, oh four. If you sit Foundation, your next one is Force as the rate of change of momentum, and impact forces.

Every other video is on scholafly.com too, easy to search by video code or by keyword. Whatever you're revising, go there and have a look, or, watch the next video.

Related terms

For: AQA GCSE 8463, Edexcel GCSE 1PH0, OCR GCSE J249

On the specification

BoardSpecStatement
AQA GCSE 84634.5.6.3.4aFactors affecting braking distance 2
Edexcel GCSE 1PH02.31Explain the dangers caused by large decelerations and estimate the forces involved in typical situations on a public road
OCR GCSE J249P8.1eExplain the factors which affect the distance required for road transport vehicles to come to rest in emergencies and the implications for safety
OCR GCSE J249P8.1gExplain the dangers caused by large decelerations
For teachers

This GCSE Physics lesson teaches braking, energy and large decelerations. By the end, students should be able to explain braking as friction in the brakes doing work that moves the car's kinetic energy into the thermal store of the brakes. It works through three worked examples and the mistakes examiners report, and suits Foundation and Higher tier students.