ScholaFly

MA15-02 Maths Watch

Coordinates from Geometric Information and Midpoints

Watch on YouTube

In this lesson

In this video you'll learn about coordinates from geometric information and midpoints for GCSE Maths, with worked examples and the mistakes examiners report. By the end you'll be able to find a point's coordinates using a geometric property that needs a calculation step, and find the midpoint of a line segment by averaging both coordinates, and calculate the length of a line segment from its endpoint coordinates.

What it covers

  1. 2:43 A line segment is the straight piece of line between two points
  2. 6:28 Two points also have a distance between them: the length of the line segment that joins them

Key words

About this video

Coordinates from Geometric Information and Midpoints | GCSE Maths

How to find a point's coordinates using a geometric property that needs a calculation step, with worked examples and the mistakes examiners report.
Edexcel and Cambridge IGCSE, Foundation (Cambridge: Core). Straight-Line Graphs 2 of 8.
Full Straight-Line Graphs playlist: https://www.youtube.com/playlist?list=PLbg_gB6oHwzk
More at https://scholafly.com

Watch first: Plotting Coordinates in All Four Quadrants (x, y) - https://youtu.be/mFdrb1nxXKs
Video code: MA15-02 (search "ScholaFly MA15-02")

Videos in this chapter:
MA15-01 Coordinates in Four Quadrants: https://youtu.be/mFdrb1nxXKs
MA15-02 Coordinates from Geometric Information and Midpoints: https://youtu.be/cHsQ0yFfayk
MA15-03 Plotting Straight-Line Graphs: https://youtu.be/fuLTk-boAuA
MA15-04 Finding the Gradient of a Straight Line
MA15-05 Gradient and Y-Intercept via y=mx+c
MA15-06 Finding the Equation of a Straight Line
MA15-07 Equations of Parallel Lines
MA15-08 Equations of Perpendicular Lines

#GCSEMaths #StraightLineGraphs #Midpoints

For teachers
This GCSE Maths lesson teaches coordinates from geometric information and midpoints. By the end, students should be able to find a point's coordinates using a geometric property that needs a calculation step, and find the midpoint of a line segment by averaging both coordinates, and calculate the length of a line segment from its endpoint coordinates. It works through two worked examples and the mistakes examiners report, and suits Foundation tier students.

Exam board specification references:
Cambridge 0580
- C3.4 Extended content only.
- E3.4 Calculate the length of a line segment
Edexcel 4MA1
- F3.3D Determine the coordinates of points identified by geometrical information
- F3.3E Determine the coordinates of the midpoint of a line segment, given the coordinates of the two end points

Read the transcript

Two trees are marked on a park map. One stands at negative one, six, and the other stands at seven, negative two. A bench goes halfway between them. Its position comes from those four numbers alone, with no ruler and no drawing.

This is video two of eight in Coordinates and Straight-Line Graphs. Every step here reads points off a grid, so if that feels shaky, start with Coordinates in Four Quadrants.

Some points are not given, and cannot be read off the drawing either. They have to be worked out from a fact about the shape. ABCD is a parallelogram. A is at one, two. B is at five, two. C is at six, five. The question wants the coordinates of D. In a parallelogram, opposite sides are equal and parallel. So side AD is a copy of side BC, the same length and pointing the same way. A copy of a side is a trip you can count on the grid: how many squares across, and how many squares up. Count the trip from B to C, then make it from A. Where is D? D is at two, five. The trip from B to C is one along and three up, and A makes the same trip. Along first: B's x is five and C's x is six, so that is one along. Up next: B's y is two and C's y is five, so that is three up. Now start at A, at one, two. One plus one is two, and two plus three is five, which puts D at two, five. The other pair of sides agrees. A to B is four along with no change up, and D to C, from two, five to six, five, is the same. The shape closes, which is how you know D is right.

A line segment is the straight piece of line between two points. Its midpoint is the point halfway along it. Halfway along the segment is halfway across and halfway up at once. And halfway between two numbers is their mean, the ordinary average: add them, then halve. On a number line, which number sits halfway between two and eight? Five. Two plus eight is ten, and half of ten is five. That gives the midpoint method. Add the two x-coordinates and halve. Add the two y-coordinates and halve. Now the bench: what is the midpoint of negative one, six and seven, negative two? The bench is at three, two. Here is the working, with the x-coordinates first. The x-coordinates are negative one and seven. Negative one plus seven is six. Half of six is three. The y-coordinates are six and negative two. Six plus negative two is four. Half of four is two. That fits the map. Three, two sits to the right of P and to the left of Q, below P and above Q. One more pair of points now, and an answer somebody wrote down for them. For two, five and seven, one, what has gone wrong with four, three? Two plus seven is nine, and half of nine is four and a half. Four, three has dropped the half, and the midpoint is four point five, three. The y-coordinate was fine, because five plus one is six and half of six is three. A midpoint can sit between grid lines, and four point five is a perfectly good coordinate. One examiner's report, on a question whose midpoint was three point five, one, says this. The most common errors were three, one and four, one, and a few reversed the co-ordinates, one, three point five. The right answer had a half in it, and the two most common wrong answers are the whole numbers either side of three point five. The fix is to keep every half you get, and to write x first, then y. If a question gives two points and asks for a midpoint, adding and halving is all it needs. Gradients, which measure steepness, and equations of lines are a different, later skill, so leave them out unless the question asks. And a midpoint you calculate does not automatically sit on some other line in the diagram. That has to be shown, not assumed.

Two points also have a distance between them: the length of the line segment that joins them. Draw a right-angled triangle under the segment, with one side going straight across and one going straight up. The segment itself is the hypotenuse, the longest side, opposite the right angle. Which rule finds the longest side of a right-angled triangle from the other two? Pythagoras' theorem. a squared plus b squared equals c squared, where c is the hypotenuse and a and b are the other two. Take the points negative two, one and four, nine. The triangle under that segment has an across side and an up side. Across first: four take away negative two is six. Then up: nine take away one is eight. Now Pythagoras. Six squared is thirty-six, and eight squared is sixty-four. Thirty-six plus sixty-four is one hundred, and that is c squared. The square root of one hundred is ten, so the segment is ten units long. Now one with three answers to choose from: five units, seven units or twenty-five units. Which is the length of the segment from one, one to four, five? Five units. Across is three and up is four. Nine plus sixteen is twenty-five, and the square root of twenty-five is five. Seven adds the two sides without squaring them, and twenty-five stops before the square root. The order of the points does not matter here. Going from nine down to one is negative eight, and negative eight squared is still sixty-four. When the total is not a square number, the length will not be a whole number. Leave it as a square root if the question wants an exact answer, or round it as the question says.

Three to finish: the method first, then two on points this video has not used. What do you do with the two x-coordinates to find a midpoint? Add them and halve. The two y-coordinates get the same treatment, and the answer is written x first. Over to the next. What is the midpoint of nought, nought and ten, negative four? Five, negative two. Nought plus ten is ten, and half is five. Nought plus negative four is negative four, and half is negative two. Try this. How long is the segment from nought, nought to five, twelve? Thirteen units. Twenty-five plus one hundred and forty-four is one hundred and sixty-nine, and its square root is thirteen. And the bench on the park map sits at three, two, halfway between the two trees.

If midpoints, lengths and a missing corner all came out right just now, give this video a thumbs up, because you could teach this one. A thumbed video is one you can skip next time, and an unthumbed one is still on your list. If it has not landed, save the playlist, then write the two halving sums out once by hand, which is often what makes them stick.

Next in the chapter is Plotting Straight-Line Graphs, where whole lines go onto the grid.

For more, visit scholafly.com, or watch the next video.

Related terms

For: Cambridge IGCSE 0580, Edexcel IGCSE 4MA1

On the specification

BoardSpecStatement
Cambridge IGCSE 0580C3.4Extended content only.
Cambridge IGCSE 0580E3.4Calculate the length of a line segment; Find the coordinates of the midpoint of a line segment
Edexcel IGCSE 4MA1F3.3DDetermine the coordinates of points identified by geometrical information
Edexcel IGCSE 4MA1F3.3EDetermine the coordinates of the midpoint of a line segment, given the coordinates of the two end points
For teachers

This GCSE Maths lesson teaches coordinates from geometric information and midpoints. By the end, students should be able to find a point's coordinates using a geometric property that needs a calculation step, and find the midpoint of a line segment by averaging both coordinates, and calculate the length of a line segment from its endpoint coordinates. It works through two worked examples and the mistakes examiners report, and suits Foundation tier students.