ScholaFly

GE06-05 Geography Watch

Range, quartiles and dispersion graphs: measuring spread

Watch on YouTube

In this lesson

Range, quartiles and dispersion graphs: how to measure how spread out data is: the range, with worked examples and the mistakes examiners report. AQA 8035, Edexcel 1GA0, Edexcel 1GB0, Eduqas C111, Eduqas C112, OCR J383 and OCR J384 GCSE. Maths for geography 5 of 6. More at https://scholafly.com

What it covers

  1. 0:00 Intro: range: measuring spread
  2. 0:51 Spread and the range
  3. 2:59 Range: measuring spread: quartiles and the IQR
  4. 7:54 Dispersion graphs
  5. 12:47 Grouped data

About this video

Range, quartiles and dispersion graphs: measuring spread | GCSE Geography | GE06-05

Range, quartiles and dispersion graphs: how to measure how spread out data is: the range, with worked examples and the mistakes examiners report.
AQA 8035, Edexcel 1GA0, Edexcel 1GB0, Eduqas C111, Eduqas C112, OCR J383 and OCR J384 GCSE. Maths for geography 5 of 6.
More at https://scholafly.com

Video code: GE06-05 (search "ScholaFly GE06-05")

#GCSEGeography #MathsForGeography #RangeMeasuringSpread

For teachers
This GCSE Geography lesson teaches range, quartiles and dispersion graphs: measuring spread. By the end, students should be able to measure how spread out data is: the range (highest minus lowest), the lower and upper quartiles and the inter-quartile range from ordered data; say why the inter-quartile range is often better than the range; read the median and quartiles from a cumulative frequency curve; and plot, read and compare dispersion graphs. It works through three worked examples and the mistakes examiners report.

Exam board specification references:
AQA 8035
- 3.4.2
- 3.4.4
Edexcel 1GA0
- MS:Statistical:1
Edexcel 1GB0
- MS-Stat.1
Eduqas C111
- AppA:2.1
- AppA:4.1
Eduqas C112
- AppA:2.1
- AppA:4.1
OCR J383
- 3.3(4)
- 3[graphs]
- 5d[statistical]-b1
OCR J384
- 5d[Statistical skills][1]
- 9.3.4
- 9[Graphs and charts to be studied][5]

Read the transcript

What number tells two beaches apart when their middle pebbles and their ranges match? A fieldwork group measures nine pebbles on each of two beaches on the Barnwing Coast, in the fictional land of Owlobia, one at Featherby and one at Penbury. The middle pebble is forty-one millimetres at Featherby and forty-two at Penbury. The ranges are sixty-three and sixty-two millimetres, so the group concludes the beaches are alike. Plot every pebble, though, and Featherby's sit in a tight cluster while Penbury's are strewn from gravel to cobbles. One number catches that difference, and building it starts with the range.

Spread is how far the values in a set are scattered, which is a different question from where their middle is. The median answers the middle question: it's the middle value once the data is in order, and the video on mean, median and mode covers it in full. The first measure of spread is the range, the highest value take away the lowest. The highest and lowest can sit anywhere in a table. They're often not the first and last values listed, so find them before you subtract. Now try one. Rainfall at six stations, in the order a table lists them, is fifty-two, thirty-one, seventy-eight, twenty-four, sixty and forty-five millimetres. A is seven millimetres. B is fifty-four millimetres. C is seventy-eight millimetres. Find the two values that matter first. Which of the three is the range of the rainfall? It's B, fifty-four millimetres. The highest is seventy-eight and the lowest twenty-four, and seventy-eight take away twenty-four is fifty-four. A, seven, comes from the first and last listed, fifty-two and forty-five, and that is not the range. C is only the highest value on its own. One examiner's report on a range question notes that some students "selected the first figure listed in the table and the last figure listed in the table, which was incorrect." The fix is to circle the highest and the lowest wherever they sit, then subtract and give the unit. The range has one weakness. It uses only the two most extreme values, so a single odd value can stretch it.

Quartiles split ordered data into four equal parts. The lower quartile sits a quarter of the way up the data, and the upper quartile three quarters of the way up. With n values in order, the lower quartile is at position n plus one, over four. The upper quartile is at three times n plus one, over four. The inter-quartile range, the I Q R for short, is the upper quartile take away the lower quartile. It's the spread of the middle half of the data. The I Q R isn't the range. The range runs from end to end, while the I Q R covers only the middle half. Pedestrians were counted for five minutes at eleven sites in Owlton. The counts were fourteen, twenty-two, nine, thirty-one, eighteen, forty-five, twenty-six, twelve, thirty-eight, twenty and twenty-seven. The question asks for the inter-quartile range, with the working shown. Have a go at this one before I show you. Order them first. Nine, twelve, fourteen, eighteen, twenty, twenty-two, twenty-six, twenty-seven, thirty-one, thirty-eight, forty-five. Eleven values, so the lower quartile is at eleven plus one, over four, which is the third value. That's fourteen. The upper quartile is at three times twelve, over four, which is the ninth value. That's thirty-one. The I Q R is thirty-one take away fourteen, which is seventeen pedestrians. The range, forty-five take away nine, is thirty-six. It answers a different question. One examiner's report on an I Q R question says "Students either knew how to calculate the interquartile range or they didn't. The majority didn't. The most frequent wrong answer was the range." The fix is to write both positions down before any subtraction: n plus one over four, and three times that. A new question now. Nine wind-speed readings were taken around a school in Gradeley, in metres per second. They were two point one, three point four, one point eight, four point nought, two point nine, three point one, five point two, two point five and three point eight. This time, find only the upper quartile. Try it on paper before I show you the answer. In order, they run one point eight, two point one, two point five, two point nine, three point one, three point four, three point eight, four point nought, five point two. The position is three times nine plus one, over four. Three times ten is thirty, and thirty over four is seven point five. Position seven point five falls halfway between the seventh and eighth values, so the upper quartile is the mean of those two. The seventh value is three point eight and the eighth is four point nought. Together they make seven point eight, and half of that is three point nine. The upper quartile is three point nine metres per second. The lower quartile works the same way. Position two point five falls halfway between two point one and two point five, so it's two point three, and the I Q R is one point six metres per second. One examiner's report on an upper quartile question says "Most found calculating where the upper quartile occurred in the sequence challenging." It adds that they needed the formula, three times n plus one, over four. This step is hard, so write the position before the value every time. When it ends in point five, take the mean of the two values either side. One examiner's report notes it was "pleasing to see an increasing percentage of candidates getting this question correct" on the I Q R. If order, position and subtract are falling into place, you're part of that rise.

A dispersion graph shows every value in a set as a dot in a column, against a vertical scale, with repeated values side by side. Each site or group gets its own column, so two beaches can sit side by side on the same scale. Reading one is counting. The top dot take away the bottom dot gives the range, and crossing off dots in pairs, one from the top and one from the bottom, leaves the median standing. Picture Penbury's nine dots in their column. How many pairs do you cross off before the median is left? Four pairs. That takes away eight dots, and the one left standing, the fifth, is the median, forty-two millimetres. The quartiles come the same way, by crossing off pairs within the dots above the median and within the dots below it. Where the middle falls between two dots, the quartile is halfway between them. Now the two beaches in full. Featherby's nine pebbles are thirty-two, thirty-five, thirty-eight, forty, forty-one, forty-three, forty-five, forty-eight and ninety-five millimetres. Penbury's are twelve, twenty, twenty-eight, thirty-five, forty-two, fifty, fifty-eight, sixty-six and seventy-four millimetres. Here are the quartiles, found by that same routine. Featherby's lower quartile is thirty-six point five and its upper quartile forty-six point five. Penbury's are twenty-four and sixty-two. The task is to compare the spread of the two beaches, using both measures. Pause it there and work it out for yourself. The ranges first. Featherby's is ninety-five take away thirty-two, sixty-three millimetres, and Penbury's is seventy-four take away twelve, sixty-two millimetres. Next come the I Q Rs. Featherby's is forty-six point five take away thirty-six point five, which is ten millimetres. Penbury's is sixty-two take away twenty-four, which is thirty-eight millimetres. The ranges are almost the same, but Penbury's I Q R is nearly four times Featherby's. The middle half of Penbury's pebbles is far more spread out, while Featherby's are consistent. One beach still needs explaining. Why is Featherby's range so large when its I Q R is so small? Because of one pebble, the ninety-five millimetre one. It sits far above the rest and stretches the range, but it falls in the top quarter, outside the middle half the I Q R measures. One examiner's report says most candidates "were unaware that the interquartile range has the advantage of not being influenced" by anomalies, outliers or extreme values. That advantage is the answer to have ready. The I Q R leaves out the top and bottom quarters, so one extreme value can't inflate it, and a small I Q R means consistent data. That's the number the fieldwork group missed. The beaches share a middle and a range, but their I Q Rs are ten and thirty-eight millimetres. A line graph can't show this. Joining the pebbles with a line would suggest a change from one pebble to the next, when the pebbles come in no order at all. One examiner's report, on choosing a graph for several sets of data, says many answered "incorrectly by ticking 'line graph'", and that students "need to familiarise themselves with the use of dispersion graphs". The fix is the match. Several sets of values to compare for spread go on a dispersion graph, and some courses name it among the graphs to draw and read. When a question asks you to plot a missing value, put it in its column at the right height, then count it in before you find the median.

Cumulative frequency is a running total. Each class's frequency is added to all the ones before it. Forty shoppers in Owlton were asked how far they had travelled. Four came up to two kilometres, six from two to four, ten from four to six, ten from six to eight, six from eight to ten, and four from ten to twelve. The running totals are four, ten, twenty, thirty, thirty-six and forty. Each running total is plotted against the top of its class, so four goes at two kilometres and ten at four kilometres, and the points are joined with a smooth curve. To read the median, go to half the total, twenty, then across to the curve and down to the axis. That lands on six kilometres. Same method, with two new starting points on the total. Reading from a quarter and three quarters of forty, what are the quartiles? Four kilometres and eight kilometres. A quarter of forty is ten, which reads down to four kilometres, and three quarters is thirty, which reads down to eight. That gives an I Q R of eight take away four, which is four kilometres, read off the curve without listing a single shopper.

One pass back over spread, and the sums are yours. What is the range of seven, nineteen, three, fifteen and eleven? Sixteen. The highest is nineteen and the lowest is three, wherever they sit in the list. Now quartiles: with fifteen values in order, where does the lower quartile sit? At the fourth value. Fifteen plus one is sixteen, and sixteen over four is four. Another one: a thirty millimetre pebble joins Featherby's column. What's the new median? Forty point five millimetres. There are ten values now, so the median is the mean of the fifth and sixth, forty and forty-one. Now the reason: why is the I Q R often better than the range? It leaves out the top and bottom quarters, so one extreme value can't inflate it. And the beaches at Featherby and Penbury match on the middle and the range, but their I Q Rs of ten and thirty-eight millimetres show how different they are.

If the I Q R now runs from order to positions to subtraction without a hitch, give this a thumbs-up, because you're solid on this. If not, come back to it later in the week and start with the pedestrian counts.

Next in the chapter is Reading a data table and drawing a conclusion. Hopefully that's next in your feed, but if not, search for ScholaFly G E oh six, oh six.

Every other video is on scholafly.com too, easy to search by video code or by keyword. Whatever you're revising, go there and have a look, or, watch the next video.

Related terms

For: AQA GCSE 8035, Edexcel GCSE 1GA0, Edexcel GCSE 1GB0, Eduqas GCSE C111, Eduqas GCSE C112, OCR GCSE J383, OCR GCSE J384

On the specification

BoardSpecStatement
AQA GCSE 80353.4.2
AQA GCSE 80353.4.4
Edexcel GCSE 1GA0MS:Statistical:1
Edexcel GCSE 1GB0MS-Stat.1
Eduqas GCSE C111AppA:2.1
Eduqas GCSE C111AppA:4.1
Eduqas GCSE C112AppA:2.1
Eduqas GCSE C112AppA:4.1
OCR GCSE J3833.3(4)
OCR GCSE J3833[graphs]
OCR GCSE J3835d[statistical]-b1
OCR GCSE J3845d[Statistical skills][1]
OCR GCSE J3849.3.4
OCR GCSE J3849[Graphs and charts to be studied][5]
For teachers

This GCSE Geography lesson teaches range, quartiles and dispersion graphs: measuring spread. By the end, students should be able to measure how spread out data is: the range (highest minus lowest), the lower and upper quartiles and the inter-quartile range from ordered data; say why the inter-quartile range is often better than the range; read the median and quartiles from a cumulative frequency curve; and plot, read and compare dispersion graphs. It works through three worked examples and the mistakes examiners report.