ScholaFly

CH08-01 Chemistry Watch

Concentration in moles per dm3 (triple, Higher)

Watch on YouTube

In this lesson

Concentration in moles per dm3: how to work with a concentration in moles per dm3, with worked examples and the mistakes examiners report. AQA 8462, Edexcel 1CH0 and OCR J248 GCSE. Concentration and yield 1 of 4. More at https://scholafly.com

By the end: Work with a concentration in moles per dm3 - finding the moles or the mass of solute in a stated volume of solution, and converting between g/dm3 and mol/dm3.

What it covers

  1. 0:00 Intro: concentration in moles per dm3
  2. 0:45 Moles per
  3. 3:09 Relative formula mass
  4. 6:01 Moles, concentration, volume
  5. 9:51 Mass of solute
  6. 12:25 Back to the two bottles

Key words

About this video

Concentration in moles per dm3 (triple, Higher) | GCSE Chemistry | CH08-01

Concentration in moles per dm3: how to work with a concentration in moles per dm3, with worked examples and the mistakes examiners report.
AQA 8462, Edexcel 1CH0 and OCR J248 GCSE. Concentration and yield 1 of 4.
More at https://scholafly.com

Watch first: CH07-03 - https://youtu.be/W9mk_AINeVw, CH07-04 - https://youtu.be/lf6rYWwN3ko
Video code: CH08-01 (search "ScholaFly CH08-01")

#GCSEChemistry #ConcentrationAndYield

For teachers
This GCSE Chemistry lesson teaches concentration in moles per dm3 (triple, Higher). By the end, students should be able to work with a concentration in moles per dm3 - finding the moles or the mass of solute in a stated volume of solution, and converting between g/dm3 and mol/dm3. It works through four worked examples and the mistakes examiners report.

Exam board specification references:
AQA 8462
- 4.3.4
- 4.4.2.5a
Edexcel 1CH0
- 5.10C
- 5.8C
OCR J248
- C5.1a
- C5.1c
- CM5.1i
- CM5.1ii
- CM5.1iii
- CM5.1iv
- CM5.1vi

Read the transcript

Two bottles, two labels, and both say forty grams per decimetre cubed. So why does one of them neutralise more acid than the other? One bottle is sodium hydroxide, the other potassium hydroxide. Pour the same volume of each into the same acid, and the sodium hydroxide neutralises more. It is tempting to decide one label must be wrong. Both are right. A label in grams tells you how heavy the dissolved stuff is, and the acid is not weighing anything. What the acid does respond to needs a second kind of label, built here step by step.

You have met concentration in grams per decimetre cubed: the mass of solute in each decimetre cubed of solution. The solute is the substance that is dissolved. Everything in this video is Higher tier, and it adds a second way to measure a concentration. A concentration in moles per decimetre cubed is the number of moles of solute dissolved in each decimetre cubed of solution. A mole is a fixed number of particles. If the mole itself feels shaky, the video on the mole and the Avogadro constant covers it; here it is used, not rebuilt. A decimetre cubed is a litre, which is a thousand centimetres cubed. Most volumes in a lab arrive in centimetres cubed, so that thousand matters in every example. How many centimetres cubed are there in nought point two five decimetres cubed? Two hundred and fifty centimetres cubed, because you multiply by a thousand. The volume in a concentration is always the volume of solution, never the volume of water you started with. To make a solution properly, you dissolve the solid, then add water until the solution reaches a line on the flask called the mark. The total volume is what gets fixed. Two students each dissolve nought point one moles of salt. One makes it up to the one decimetre cubed mark. The other tips the salt into one decimetre cubed of water. Which student's solution is exactly nought point one moles per decimetre cubed? The first student's. Adding a solid to water changes the total volume, so the second solution is not exactly one decimetre cubed any more. One last point about the unit. You may also see it printed as moles decimetres to the minus three. That is the same unit, said the same way: moles per decimetre cubed.

Now the first conversion, from grams to moles. A bottle of sodium carbonate solution is labelled twenty-six point five grams per decimetre cubed. First you need the relative formula mass of sodium carbonate, N a two C O three, which is its relative atomic masses added up. Those come off the periodic table you are given in the exam. Two sodiums: two times twenty-three is forty-six. One carbon is twelve. Three oxygens: three times sixteen is forty-eight. Add them up. Forty-six plus twelve plus forty-eight is one hundred and six. That means one mole of sodium carbonate has a mass of one hundred and six grams. Grams to moles: do you multiply by one hundred and six, or divide by it? Divide. The units say so: grams per decimetre cubed, divided by grams per mole, leaves moles per decimetre cubed. Twenty-six point five divided by one hundred and six is nought point two five. The concentration is nought point two five moles per decimetre cubed. That passes a quick sense check. The label's mass is a quarter of the mass of one mole, so each decimetre cubed holds a quarter of a mole. Now reverse it: nought point two five moles per decimetre cubed back to grams. What is the sum? Multiply this time. Nought point two five times one hundred and six gives twenty-six point five grams per decimetre cubed again. One examiner's report on this conversion says "the correct answer for the concentration in" moles per decimetre cubed "was achieved more often than the subsequent conversion to" grams per decimetre cubed. It goes on: "A common error was to use a conversion factor of" one hundred and twelve, two times the relative formula mass of potassium hydroxide, "rather than" fifty-six. A conversion factor is the number you multiply or divide by. Those students used twice the right relative formula mass, so every answer after it was doubled. The fix is to find the relative formula mass once, from the formula in front of you, and keep that one number. In sodium carbonate, the two sodiums are already inside the one hundred and six.

A reaction never uses a whole bottle, only a measured volume of solution, so a volume comes into it next. The relationship is this. Moles of solute equals concentration in moles per decimetre cubed, times volume in decimetres cubed. The reasoning runs like this. The concentration is the moles in each decimetre cubed, so two decimetres cubed hold twice that, and half a decimetre cubed holds half. The units agree with it. Moles per decimetre cubed, times decimetres cubed, leaves moles, because the decimetres cubed cancel. Same moles of solute, twice the volume of solution: what happens to the concentration? It halves, because the same moles are now spread through twice the volume. To find anything other than moles, rearrange the relationship first, on its own line, before a single number goes in. To find concentration, divide both sides by volume. Concentration equals moles divided by volume. To find volume, divide both sides by concentration. Volume equals moles divided by concentration. A reaction needs nought point nought one five nought moles of hydrochloric acid. The bottle on the shelf is nought point two nought nought moles per decimetre cubed. What volume do you measure out, in centimetres cubed? Pause and work it out. Seventy-five centimetres cubed is the volume to measure. The working goes like this. Volume is the unknown, so the rearranged line is volume equals moles divided by concentration. Substitute, with the units: nought point nought one five nought moles, divided by nought point two nought nought moles per decimetre cubed. That gives nought point nought seven five nought decimetres cubed. The moles cancel and a volume is left, so the units check passes. The question wants centimetres cubed, so multiply by a thousand. Nought point nought seven five nought times a thousand is seventy-five centimetres cubed. A different attempt at the same question: a student multiplies nought point nought one five nought by nought point two nought nought, and ends up with three centimetres cubed. What is wrong with an answer of three centimetres cubed? Two things are wrong. The units never give a volume, and that little acid holds far too few moles. Moles times moles per decimetre cubed is not a volume at all. And three centimetres cubed of this acid holds only nought point nought nought nought six moles, far short of the nought point nought one five nought you need. A different examiner's report records this slip: "A common error was to multiply the moles and concentration together." The habit that stops it is three lines, every time: the relationship, the rearranged line with its operation said out loud, then the numbers with their units.

The method grows by one step when the question wants the mass of solute in a volume of solution. Take two hundred and fifty centimetres cubed of potassium nitrate solution, at nought point four nought nought moles per decimetre cubed. The steps run in a fixed order: convert, then moles, then mass. The relative formula mass first, from the periodic table. Potassium is thirty-nine, nitrogen is fourteen, and three oxygens make forty-eight, which totals one hundred and one. What mass of potassium nitrate is dissolved? Try it on paper first. The answer is ten point one grams of potassium nitrate. Convert first, on its own line. Two hundred and fifty divided by a thousand is nought point two five nought decimetres cubed. Then the moles: concentration times volume. Nought point four nought nought times nought point two five nought is nought point one nought nought moles. Then the mass: moles times relative formula mass. Nought point one nought nought times one hundred and one is ten point one grams. Run the same sum with the convert line missing. Nought point four times two hundred and fifty gives one hundred moles, and that times one hundred and one gives ten thousand one hundred grams. Why can the answer ten thousand one hundred grams not be right? That is over ten kilograms of salt in a quarter of a litre of solution, which is absurd. Another examiner's report describes students who left the volume in centimetres cubed: their "calculated number of moles was" one thousand "times the correct value." The way to stop it is the convert line, written first and above everything else, before a single number is substituted. Then one last check, out loud. Say each number's unit as you write it down. Moles per decimetre cubed only ever meets decimetres cubed, never centimetres cubed.

Back to the two bottles on the shelf, both labelled forty grams per decimetre cubed. The method is the one from the sodium carbonate bottle. Their relative formula masses come straight off the periodic table: forty for sodium hydroxide, and fifty-six for potassium hydroxide. Which holds more moles per decimetre cubed, sodium or potassium hydroxide, and how many more? Sodium hydroxide holds more, by about nought point two nine moles per decimetre cubed. Grams to moles, so divide. Forty divided by forty is one point nought nought moles per decimetre cubed of sodium hydroxide. Forty divided by fifty-six is nought point seven one four moles per decimetre cubed of potassium hydroxide. The difference is about nought point two nine. A potassium atom is heavier than a sodium atom, so each unit of potassium hydroxide weighs more. Forty grams of it holds fewer of them. The acid neutralises hydroxide unit by unit. It counts them and never weighs them, which is why the sodium hydroxide neutralised more. A label in grams per decimetre cubed tells you how heavy. A label in moles per decimetre cubed tells you how many, and how many is what a reaction uses.

Three quick questions to finish, and the last one goes back to the shelf. What does a concentration in moles per decimetre cubed tell you? The number of moles of solute dissolved in each decimetre cubed of solution. Here's a bottle you have not met: sodium chloride, with a relative formula mass of fifty-eight point five. At nought point five moles per decimetre cubed, how many grams per decimetre cubed? Twenty-nine point two five grams per decimetre cubed, because moles to grams means multiply. One more, beside the two bottles: lithium hydroxide has a relative formula mass of twenty-four. At forty grams per decimetre cubed, more or fewer moles than the sodium hydroxide label? More, about one point six seven moles per decimetre cubed, because a lighter unit means more of them in every forty grams.

If you can turn a grams label into moles and back without a prompt, a thumbs-up on this one tells you later that you're solid on this. Still wobbly, then save the playlist and write the convert line out three times; it sticks.

Next in the chapter: the molar gas volume, and the room a gas takes up. Hopefully that's next in your feed, but if not, search for ScholaFly C H oh eight, oh two.

Every other video is on scholafly.com too, easy to search by video code or by keyword. Whatever you're revising, go there and have a look, or, watch the next video.

Related terms

For: AQA GCSE 8462, Edexcel GCSE 1CH0, OCR GCSE J248

On the specification

BoardSpecStatement
AQA GCSE 84624.3.4Using concentrations of solutions in mol/dm 3
AQA GCSE 84624.4.2.5aTitrations
Edexcel GCSE 1CH05.10CCarry out simple calculations using the results of titrations to calculate an unknown concentration of a solution or an unknown volume of solution required
Edexcel GCSE 1CH05.8CCalculate the concentration of solutions in mol dm–3 and convert concentration in g dm–3 into mol dm–3 and vice versa
OCR GCSE J248C5.1aExplain how the concentration of a solution in mol/dm is related to the mass of the solute and the volume of the solution
OCR GCSE J248C5.1cExplain the relationship between the volume of a solution of known concentration of a substance and the volume or concentration of another substance that react completely together
OCR GCSE J248CM5.1iCalculations with numbers written in standard form when using the Avogadro constant
OCR GCSE J248CM5.1iiProvide answers to an appropriate number of significant figures
OCR GCSE J248CM5.1iiiConvert units where appropriate particularly from mass to moles
OCR GCSE J248CM5.1ivArithmetic computation, ratio, percentage and multistep calculations permeates quantitative chemistry
OCR GCSE J248CM5.1viChange the subject of a mathematical equation
For teachers

This GCSE Chemistry lesson teaches concentration in moles per dm3 (triple, Higher). By the end, students should be able to work with a concentration in moles per dm3 - finding the moles or the mass of solute in a stated volume of solution, and converting between g/dm3 and mol/dm3. It works through four worked examples and the mistakes examiners report.